FOB Price
Obtenir le dernier prix10 / Set
|Minimum Order
Localité:
Shanghai
Prix de commande minimale:
Commande minimale:
10 Set
Packaging Detail:
steel box
Delivery Time:
10days
Supplying Ability:
5 Set per Week
Payment Type:
T/T
Personne àcontacter kimi
WenHua Road, Xinxiang, Henan
DRILL
Drill out the damaged threads using the drill supplied in
the kit. Drill to a sufficient depth to accommodate the
insert length and the bolt or screw being used.
TAP
Tap the hole using the Heli-Coil tap supplied in the kit. Check the size on the shank
of the tap to be sure it is the right size.Tap the hole to
sufficient depth to accommodate the insert length and bolt
or screw being used.
Remove the tang by using the tang break-off rod
when supplied with the kit) or a punch which fits the
inside of the insert. Place the punch or rod squarely on
the tang and strike sharply.
For insert over 1/2 inch, *2mm, or for spark plug inserts,
use long nose pliers. Holding the tang with the pliers,
bend it alternately in and out until it comes free.
INSTALL
Install the appropriate length insert from the kit. Use
the installation tool supplied in the kit or set. Wind
the insert into the hole until the top coil is1/4 to 1/2
turn below the top surface.
TANG REMOVAL
