Description
1. SCOPE
EMT Co.,Ltd's power pack cubicle is used for Switching Operation
Power in Normal condition and Emergency power backup in Power
outage in distribution system. When distribution line is outage due
to distribution fault,but the control power of switch
controller/switch/checking instrument should be supplied even
though main line power was outage status to controland check of
switching equipments.
Power Pack Cubicle shall be able to supply Control Power such as
AC**0/**0V, DC*4/*8V even in distribution line interruption and
power outage.
2. FUNCTION
1)Control Power Supply from *0kV high voltage line in
normal
condition
2)Emergency Control Power Supply in distribution line fault and
power outage
3)AC**0/**0V, DC*4/*8V, DC*2V Power Supply without interruption
4)Rechargeable battery/Floating Charging
5)Voltage/Ampere indication
6)Remotely monitoring of operating status(in optional)
3. SPECIFICATION
1)Input Voltage : AC **0V
2)AC Control output Voltage : **0/**0V, (*0/5A), **0W
3)Rating Frequency : *0/*0Hz
4)Rating Capacity : **0VA
5)DC Voltage : *4/*8V(*0/*0A), **0W, DC*2V (for modem)
6)Voltage/Current indication for AC **0/**0V, DC*4/*8V
7)Floating Charging to Battery
8)Battery : DC*2V, *2AH x 4EA
9)Output Terminal : Universal outlet/ Terminal for each voltage
4. OPERATING MANUAL
1) Power pack Cubicle is connected to **0V Low Voltage
Line
* Connect to Secondary of Transformer
2) Main switch ON
3) Each Voltage main switch ON
4) Check each voltage
5) Remotely report to mobile phone (in optional)
* Report to registered person by SMS in Emergency
alarm
