Description
Brother 4.5 MM Standard Gauge
Knitting Machine Punch card or Electronic
Type
Brother 9 MM Bulky Gauge
Knitting Machine Main Bed Punch card
Brother 9 MM Bulky Gauge
Knitting Machine Ribber Bed
Creative CG**0,GE*3,
*0D 7 MM Mid Gauge Knitting Machine /Silver Reed Bulky
Gauge
Creative JBZ/L***2 /Silver
Reed 4.5 MM Standard Gauge Knitting Machine Punch
card
SK***5 Bulky (Studio, Silver,
Singer)
1.If you are not sure which
sponge bar to buy, use this guide. Measure the original sponge bar
and compare your measurements to this table. You can choose a
sponge bar that is longer than the original, however, you must
choose a sponge bar with the same outside width of the metal part
or it won’t go into your machine. Do not choose a sponge bar that
is shorter than the original.
2. Being the sponge bar
manufacturer we now make a one-size sponge bar to fit both the
standard gauge brother punch card and electronic knitting
machines. There is no longer a different length sponge bar for the
punch card and electronic machines. The new sponge bar fits both
types of machines perfectly.
3.If you would like to have a
sponge bar in your ribber to hold the needles more firmly in place,
choose the sponge bar that fits your main bed. For example, if you
have a brother standard gauge (4.5 mm) electronic knitting
machine or 4.5mm punch card machine, the same sponge bar will also
fit in the ribber replacing the plastic needle retainer bar. Using
a sponge bar in the ribber is a popular option because the needles
are more secure and won't slip down as easily. This does not apply
to the Brother Bulky Ribber as it has its own sponge bar. It's
shorter than the main bed sponge bar. We also have the sponge bar
for the Brother bulky gauge ribber.
4.The Brother Bulky Ribber has
it's own special sponge bar which is a few inches shorter than the
sponge bar for the main bed. The bulky ribber sponge
bar fits the KH***0 main bed as well as the
ribber.
5. We have a large
assortment of sponge bars for Creative ,Brother ,Singer,Silver Reed
knitting machines incl.fine gauge,standard gauge,mid gauge and
bulky gauge . Choose the size sponge bar ( needle retainer
bar) that is suitable for your knittting machines.
CREATIVE KNITTING
MACHINE:
*CG**0/GE*3/ *0DMID GAUGE 7MM (BUILT IN
INTARSIA CARRIAGE)
*JBZ/L***2 STANDARD GAUGE 4.5MM
*KH**0/**0 BULKY GAUGE
9MM
