FOB Price
Obtenir le dernier prix|
Minimum Order
Localité:
zhejiang,china
Prix de commande minimale:
-
Commande minimale:
1 Piece
Packaging Detail:
carton
Delivery Time:
within 15days
Supplying Ability:
1000 Set per Month
Payment Type:
T/T, L/C
Personne àcontacter Ms. cindy
No.01,Hongbao road,Qiangjiang Industrial park, Jiaxing, Zhejiang
Separated Pressurized Solar Water heater
Split solar water heater
composition of the system::
Split Pressurized solar water heater is composed of solar collector
(heat pipe), pressurized water tank, pipeline, working station
(including circulation pump, controller, expansion vessel, pressure
gauge, sensors and etc).
Brief introduction:
Water tank and solar collector are separated, the collector can be
put on balcony or slope roof. And the water tank can be located at
any corner in your room. With an intelligent controller and solar
working stations, the whole system works automatically.
This split pressurized solar water heater takes advantage of high
absorption and low emittance of vacuum tubes and converts absorbed
radiation into heat energy and sends it rapidly to collector by
Super-conductive Heat Pipe conductor. It can work efficiently in
four seasons.
Working Principle:
1)When the temperature difference between the solar collector and
tank is exceeded the set value temperature difference, the
controller shall start the circulation pump automatically, transfer
heat from collector to tank
2)During the running of the circulation pump, when the temperature
difference is lower than the set point, the circulation pump will
stop.
3)The circulation pump makes heat-conducting liquid circulate
automatically
4)The heat-conducting liquid transfers heat to water by heat
exchanger in the water tank.
Specification:
Inner tank: stainless steel
sus**4/2B,δ1~1.5mm
Outer tank: gavanize/colour steel,δ0.5mm
Collector Frame: aluminium alloy,δ1.4mm
Insulation:polyurethane forthing,δ*0mm
Vacuum tube:Ø*8×***0mm,tri-elements coating
heater pipe: Ø*****0.6mm,inside of Vacuum tube
Accessories:control station,magnesium,electrical heater,
non return valve,safety valve
Copper coiler:for heat exchanging,Ø*2mm×*0m
Logo:OEM,colour printing/sticker
Capacity:**0/**0/**0/**0/**0/**0L
Max.working pressure:*0bar
Max.working temperature: **0°C.
