Description
SMALL FLOAT LEVEL SWITCH
Working
Principle
The Magnetic reed switchƒ, which is arranged in
closed and non–magnetic conduitÂ, would be ON under
the function of magnetic force, when the
floaterÂ…which is fastened with
ringmagnet„ in hallow space by the action of Liquid
buoyancy approches the switch along with the conduit; and when the
floater gets away from the Magnetic reed switch, the Magnetic reed
switch would OFF. Then signals of ON & OFF would be output and
used to alarm and remote control.
Specifications
Contacts rated
power DC *0W/ AC
*0VA
Highest contacts
voltage DC **0V/ AC **0V
Highest contacts
current DC 0.7A/ AC 0.5A
Insulation
resistance
min***0&branded;
Electrical
endurance **7
times
Product Features
Ÿ Simple Principle to design, Stable And Reliable Performance and Long Working
Life;
Ÿ Applicable to the circuits of AC**0V, AC and
AC/DC*4V;
Ÿ Imported Magnetic reed switch with original
packaging, with the using life of **7 times;
Ÿ Multi-point control and romote control could
be realised as requirement;
Ÿ Safe and reliable usage under the condition of
HPHT realizable, because the Magnetic reed switch and the
conducting wire are completely insulated with the medium under
test;
Ÿ Many materials such as SUS, PP, PVC, PVDF
ETC., and many assembly ways including flange, screw, health fast
card etc., to satisfy various needs under different
conditions;
Ÿ Compact size and widely used to water
treatment, food industry, medical industry, chemical industry,
electronics industry, ship engineering, textile industry, and
hydraulic industry etc..
Type
SLM****1
Materials: SUS**4/**6L
Installation
Method: Vertical
installation
Assembly size: Φ*0
(hole)
SLM****2
Materials: SUS**4/**6L
Installation
Method: Horizontal
installation
Assembly size: Φ*0
(hole)
SLM****1
Materials: SUS**4/**6L
Installation
Method: Vertical
installation
Assembly size: Φ*7(hole)
SLM****2
Materials: SUS**4/**6L
Installation
Method: Horizontal
installation
Assembly size: Φ*7(hole)
SLM-MH*6
Materials: SUS**4
Installation
Method: Horizontal installation from inside to
outside
Assembly size: 1/2’’ internal
thread
SLM-MH*6S
Materials: SUS**4
Installation
Method: Horizontal installation from outside to
inside
Assembly size: 1/2’’ internal
thread
SLM-MH*1
Materials: PP/PA
Installation
Method: Horizontal installation from outside to
inside
Assembly size: 1/2’’ internal
thread
SLM-MH*1
Materials: PP
Installation
Method: Horizontal installation from outside to
inside
Assembly size: Φ*6(hole)
SLM-MV*5P
Materials: PP
Installation
Method: Vertical
installation
Assembly size: Φ*0(hole)
SL-MV*5S
Materials: PP/SUS
Installation
Method: Vertical
installation
Assembly size: Φ*0(hole)
