Description
0.6/1kV PVC
insulated Cable
a). Application:
0.6/1kV
PVC insulated Cable, It to be used for
indoors, in tunnel, in down wells,cable furrow or pipe,
underground.
Note: the single core
armored
cablesare used for
D.C. system only. As for
A.C.system,
armor layer should be used of non-magnetic material or magnetic
isolation measures.
b). Standard:
BS*****3.******1
or IEC ****2 *1
c). Construction:
Conductor: Copper or
Aluminum
Insulation:PVC
Sheath: PVC
Sheath Color: Black or Colors
d).
Cable Structure:
1. Conductor:
Copper(Cu)
or Aluminum
2.
PVC insulation
3.
Fill layer
4. Around the package tape
5. Inner
Sheath
6.
Steel tape
armor
7. Outer Sheath
8. Mark
e). Name
- PVC insulated PVC sheathed power cable
(PVC/PVC Cable)
- PVC insulated steel tape armored PVC sheathed power
cable (
PVC/STA/PVC
Cable)
- PVC insulated steel wire armored PVC sheathed power
cable (
PVC/SWA/PVC Cable)
- Flame retardant PVC insulated PVC sheathed power
cable (FR/PVC/PVC Cable)
- Flame retardant PVC insulated steel tape armored PVC
sheathed power cable (
FR/PVC/STA/PVC Cable)
- Flame retardant PVC insulated steel wire armored PVC
sheathed power cable (
FR/PVC/SWA/PVC Cable)
FR
–Flame Retardant
f).
Number of Cores & Nominal Cross-section
Area
| Number of Cores |
1 |
2 |
3 |
3*1 |
4 |
3*2 |
4*1 |
5 |
| Section Area (mm2) |
4 - **0 |
2.5 - **0 |
2.5 - **0 |
4 - **0 |
2.5 - **0 |
2.5 ***0 |
4 - **0 |
2.5 - *5 |
g).
Installation:
1. The installation temperature
should not over *0℃, If the ambient temperature is lower than
0℃, the cable should be preheated.
2. The bending radius of cable should not less than 8 times.
3. After installantion, the cable should with stand voltage test
for *5min. 3.5kv D.C.
In air:
1. As the single core cable
laying in parallel, the distance between the cable’s center is 2
times (for cables which cross section area of conductor ≤**5mm2)
and
*0mm (for cables which cross sectional area of
conductor≥**0mm2)
2. Ambient temperature: *0℃
3. Max. temperature of conductor: *0℃
4. Rating factors of current rating for ambient temperature:
| Air temperature |
*0℃ |
*5℃ |
*5℃ |
*0℃ |
*5℃ |
| Rating factors |
1.*2 |
1.*6 |
0.*4 |
0.*7 |
0.*9 |
Direct in ground:
1. When the single core cables are installed separately, the
distance between the cable’s center is 2 times of the cable
diameter.
2. Ambient temperature: *5℃.
3. Max. temperature of conductor: *0℃.
4. Soil thermour resistivity: 1.0℃. m/w.
5. Depth: 0.7m
6. Rating factors under different ambient temp.:
| Air temperature |
*5℃ |
*0℃ |
*0℃ |
*5℃ |
| Rating factors |
1.*1 |
1.*5 |
0.*4 |
0.*8 |
Short ciruit ratings:
| Max temperature at short circuit |
Max temperature short circuit rating |
| **0℃ |
I=*4 S√A |
