Description
A: Roll forming main machine
1: Coil width: **6mm
2: Working speed: *2m_*5m/min (not contain cutting)
3: Roll station: *2 stations
4: Material of roller: *5#forge steel, polished and coated with
chrome
5: Material of main shaft: *5forge steel
6: Main power: 3kw
7: Forming thickness: 0.5mm_1.0mm color steel and galvanized
steel
8: Transmission: By Chains 1 inch
9: Dimension of machine: : ***0× ***0× ***0mm
*0: Weight of machine: About ***0Kgs
*1: Color: Blue and yellow ( it is also can changed depend on
customer request)
*2: Cutting:
(1) Machine adopt fly-cutting
(2) Cutting after forming: Cut the sheet after roll forming to
required length
(3) Cutting motion: The main machine automatically stops and the
cutting will take place. After the cutting, the main machine will
automatically start.
(4) Material of blade: CR*2with heat treatment
(5) Length measuring: Automatic length measuring
(6) Tolerance of length: 3m+/- 1.5mm
B. Un-coiler
Dimensions: ***0mm****0mm***0mm
Width of feeding: **0mm
Capability: 3 Ton
Bound of expand &fight: **0mm_**0mm
Mode of expand &fight: Inner expand &fight by manual
Way of feeding: Manual
C: Control panel Panasonic
(1) Voltage, Frequency, Phase: **0 V, *0 Hz, 3Phase
(2) Automatic length measurement:
(3) Automatic quantity measurement
(4) Computer used to control length & quantity. Machine will
automatically cut to length and stop when required quantity is
achieved
(5) Length inaccuracy can be amended easily.
(6) Control panel: Button-type switch and touch screen
(7) Unit of length: Millimeter (switched on the control panel)
D: Hydraulic station
1: Hydraulic station power: 3kw
2: Hydraulic pleasure: *2Mpa
E: Manual out table:
(1)Jointed by *0mm**0mm tube
(2)Size: 1.0m long*0.8mwide*0.**1mhigh
(3)One out table with two support roller
