Description
Inorganic waterproofing mortar, forms dendritic crystal
when there is water. This crystal combines with the concrete
together to block out water and other liquid. When the surface and
interior of the concrete come out micro cracks, the active
substance can hydrated again and produce new hydrated crystal to
block out water. So K*1 CCCW can make concrete resistant to the
water forever. Suitable for places dipping in water all the time,
such as swimming pool, drinking water pool and so on.
PRODUCT FEATURES
â—†Excellent
waterproof performance, weather resistance and aging
resistance
â—†Can apply
on wet substrate, for waterproofing inside and outside
â—†Superior
adhesion, bonding the substrate tightly. The active substance in
the slurry can permeate into the pore and micro cracks of concrete
substrate and produce chemical action and form a dense crystal
waterproof layer.
â—†Good air
permeability, keep the substrate dry
â—†Environment
friendly, no smell and no toxic
APPLICATION
â—†Interior
and exterior concrete substrate, cement rendering, light brick
substrate
â—†Wall, floor
and roof of constructions, such as basement, tunnel, bridge,
kitchen, balcony, washing room and so on
â—†Swimming
pool and drinking water pool such places which always have
water.
SUBSTRATE PREPARATION
â—†Substrate
should be firm, stable and clean. Gap and holes needed plugging and
leveling
â—†Before
construction, wet the substrate and keep it moist, but make sure
without water on it
CONSTRUCTION TECHNOLOGY
â—†Powder :
water = *5 : 7. First pour the water to stirring tub, stir the
water while pour the powder into the tub slowly. Fully stirring to
be paste with no powder and precipitate. Stir the paste again after
settling down for several minute and be better
â—†Brushing
the mortar directly on the substrate and brushing again and again
if bubble coming out to squeeze out the air
â—†After
brushing the first layer of mortar and be curing a little, start to
brushing the mortar the second time crossly.
â—†Don’t stir
too much for one time. Dispose of the stirred mortar if get cured
in the tub.
CAUTIONS
â—†After the
coating cured, use spraying water to maintain
â—†Places
especially damp and unventilated, like basement and sealed drinking
pool, should use ventilation to accelerate the waterproof coating
get cured
â—†Applying
the product between 5~*0℃. Not allow to apply the product
outdoor on rainy days
MIX PROPOTION
â—†powder :
liquid = *5 : 7
CONSUMPTION
â—†Thickness
1.0mm about 1.5kg/㎡
STORAGE
â—†Shelf life
*2 months in dry and cool place unopened
EXECUTIVE STANDARD: GB*********8 (I)