Description
XAPV CXK,
CXK(II) series ANSI/ASME B*3.1 Process Pumps:
Zirconium
and Zirconium Alloy, Titanium and Titanium Alloy, Nickel and Nickel
Alloy, Duplex & Super Duplex SS, General SS,
CS.
- Operating
Parameters:
Flowrates: *5
to ***0 gpm, or 6 to ***0 m3/h, or **0 to ****0 lpm.
Heads: *0 to
**0 ft, or 3 to **0 m.
Discharge
pressures up to **0 psi, or 3 Mpa, or *0 bar.
Temperatures:
- *0 to **0 °F, or **0 to **0 °C.
- General
description:
Jacketed
casing and/or bearing housing available.
Foot-mounted.
Radially
splited horizontal single-stage overhung type.
Fully closed,
semi-open or open casted impeller can be choosed
freely.
Dual volutes
design for low radial force effect (while discharge
bore≥3 in or *0
mm).
Single or
dual shaft sealing system, also dynamic expeller and static packing
combined seal system available.
Suction and
discharge flanges in compliance with ANSI B*6.5 or specified
separately.
Non-sparking
coupling guard available.
Motor terms
defined by customers.
Coupling/bearings/seal
and rotor are removable without disturbing the motor or the suction
and discharge piping (Back pullout design).
- Note:
User-defined (non-standard) parts are available.
