FOB Price
Obtenir le dernier prix0.388 / Piece
|Minimum Order
Localité:
Tian Tou Industrial Zone Heng LI Town Dong Guan G
Prix de commande minimale:
Commande minimale:
1000 Piece
Packaging Detail:
75pcs or 100pcs with a plastic case20 cases with a carton According to customers' requirement
Delivery Time:
7 days after receiving buyerâï&b
Supplying Ability:
3000000 Piece per Month
Payment Type:
L/C, T/T
Personne àcontacter Ms. Jatty
Tian Tou Industrial Zone Heng LI Town, Dongguan, Guangdong
fixation of the working temperaturing
reliable snap action
perdurable
less radio interference
Technical
parameters:
Electrical parameters: 1)CQC,VDE,UL,CUL AC**0V *0~*0Hz 5A/*0A/*5A
(Resistance load)
2)UL AC**5V *0Hz *5A (Resistance load)
2.Action temperature range: *5~**0 (Optional); temperature
accuracy: ±2 ±3 ±5 ±*0
3.Recovery and action temperature difference: 8~**0 (Optional)
4.Connection method: Insert the terminal **0# (bending angle:
0~*0deg optional); Insert the terminal **7# (bending angle: 0~*0deg
optional; thickness: 0.5, 0.8mm optional)
5.Lifespan: over**0,**0 times
6.Electrical strength: No spark or breakdown for 1min at AC *0Hz
***0V
7.Contact resistance: less than *0m&branded;
8.Insulation resistance: less than**0M&branded;
Junction
method: Constant-closed: the contact point disconnects when
temperature rises; and contact point connects when temperature
falls;
Constant-opened: the contact point connects when temperature rises;
and contact point disconnects when temperature falls.
*0.Casing protective class: IP*0
*1.Grounding method: Connection is made between the metal casing of
the temperature controller and the metal part of the grounding
device.
*2.Installation method: installed for KI**1 series: general moving
ring, mini round moving ring, flat moving ring general aluminum
cover with mounting hole, extra length aluminum cover with mounting
hole
Structure and
application:
KI**2 serial products are the temperature controllers taking
bimetallic strip as the temperature-sensing unit. In case of normal
operation the electrical appliance, the bimetallic strip is in a
free state; the contact point is in a state of close/open. When the
temperature reaches the action temperature, the bimetallic strip
performs quick action generates caused by internal stress due to
heating; open/close the contact point; disconnect/connect the
circuit; thus, the temperature is in control. When the electrical
appliance is cooled to the recovery temperature, the contact point
automatically opens/closes to recover normal operation state.
Widely used in electrical heating appliances like water dispenser,
water heater, sandwich bread baker, dishwasher, dryer, sterilizing
cupboard, micro-wave oven, electric heating coffee pot, electric
cooker, refrigeratory, air-conditioner, laminator, heater of auto
seat.
Characteristics:
Stable performance, high accuracy, small size, lightweight, high
reliability, long lifespan, less interference to radio
Precautions:
1.When adopting contact temperature sensing installation, the
surface of the metal cover is required to be securely contacted
with the installing surface of the controlled device. For ensuring
the temperature sensing effect, it is required to coat thermal
conductive grease or other similar thermal conductive medium on the
surface of temperature sensor.
2.For reliable performance, collapse, loose or distorted top part
of the cover is prohibited during installation.
3.Liquid inleakage into the controller, crackle in the casing and
unauthorized change of external terminal position are
prohibited.
4.When the product is used in the circuit with maximum current of
5A, the cable with copper core at section 0. **1mm2 is required for
connection; When the product is used in the circuit with maximum
current of *0A, the cable with copper core at section 0.***1.5 mm2
is required for connection;
5.The product should be kept in a clean, dry and corrosive gas-free
warehouse with good ventilation and at relative humidity below *0%,
environment temperature below *0.
Passed
certifications :CQC UL VDE TUV SGS!
