Description
HEBEI LVJOE MACHINERY MANUFACTURING CO., LTD.
There is a power that can be ground-breaking!
There is persistence that can be persistent forever!
The name LVJOE might not be familiar to you, but it leads the
development of this industry.
You may feel the name LVJOE amiable, because it will build
wonderful future. Today’s LVJOE has won the world with its honesty.
Tomorrow’s LVJOE will continue to lead Chinese gypsum industry and
create an innovative precedent.
The theme of human developments is building a resource-conserving
and environmental friendly society. Today, low-carbon and cyclic
economy has become the orientation of society development and will
be further more the goal that modern construction industry should
pursue.
The application of the ecological and energy-efficient wall
materials has become the development tendency in modern
construction. Gypsum, with its unique texture and advantages, is
now replacing traditional building materials and gradually will
become the main trend of eco-energy saving wall.
Hebei LVJOE machinery
manufacturing co., ltd. was established in ***8 with the increasing
market demand and the national policies on new wall reform. LVJOE
now has more than **0 staff, *0 processing equipments, several CNC
equipments. We have won a number of honor including ISO***1:***0
Quality management System Certification. LVJOE grows rapidly into
one of leading manufacturers of new gypsum walling materials by its
unique design, manufacture and production technology. We integrate
production with institute high-tech research and are professional
in machinery design & manufacturing enterprise. We have a
R&D team with experts, senior engineer and professor as key
backbone.
The Instruction
of Gypsum Board Ceiling Machine
Brief
introduction
Gypsum
ceiling board is laminating PVC film in front side and aluminum
film in back side of paper faced gypsum board. The features are
waterproof, moisture proof, flame resistant, thermal insulation,
radiation proof, anti-sagging, non-deformed, etc. Gypsum ceiling
board is not only beautiful shapes, high strength, wear well,
non-poisonous, but also certain roll in adjusting indoor
temperature, and good for human health. It is an ideal green
building material that is widely used in shopping mall, station,
entertainment center and dinning room. The ceiling board just likes
art and craft by virtue of elegant design, unique pattern. Our
company has succeeded in developing new crafts on high-precision
gluing, and high technology film covering. It simplifies
traditional production crafts, improves precision of production,
stable product quality and easy operation.
Technical specification and
product introduction
The
key technology in this project includes glue spreading with high
precision, aerodynamic compositing skills in the same industry in a
leading position. It owns outstanding characteristics and
advantages, and achieves certain breakthrough and
innovation.
Gypsum ceiling
machine:
1. Usage:
Laminate film on gypsum
board
Max. width: ***0mm
Gypsum board size: ***0 x
***0mm
Glue: specific glue for PVC film
and aluminum foil
Max. sheet speed:
***5m/min
Thickness of sheet:
***0mm
Installation Power: 4.5 KW
(frequency converter and motor: top brand in China)
Frequency control, transmission
rack, glue spreading and laminating part are driven by chain wheel
and chain. The speed of whole machine is synchronous
operation.
Dimension: ****0 x ***0 x
***0mm.
2. Process:
manually/automatic loading
table—dust collection—glue spreading—unwind PVC film/aluminum
foil—aerodynamic compositing of film and gypsum board—manual
cutting—board releasing—automatic overturn—glue spreading—unwind
PVC film or aluminum foil*- aerodynamic compositing of film and
gypsum board—manual cutting—board releasing—automatic
stack
3. Machine
component:
(1) automatic
loading table and transmission part
Equip with a set of hydraulic
automatic elevator platform and automatic loading
device.
Transmission rack support:
welded by steel channel
Transmission roller: stainless
steel roller
Transmission baffle plate:
chrome plated steel board
Transmission rack
is lengthened (energy-saving, no heating part)
(2) Dust
collection section
Specific brush rollers driven by
chain clean the surface of gypsum board, which equipped manual
adjusted function. The dust is collected into dust collector
through pipe of static electricity pulse bag filter.
(3) Glue
spreading section
Features of glue spreading
rubber roller are corrosion resistant, acid and alkali-resistant,
and oil-resistant. It is made of *5# seamless steel pipes and
specific rubber packaged on pipe surface, 0.**5mm in axial
pulsation. Glue spreading roller is made of *5# chrome plated
seamless steel pipe, 0.**4mm in axial pulsation.
(4) Unwinding
section of PVC film/aluminum foil
Max. unwinding diameter:
**0mm
Equip with manual friction
tension control system
Equip with manual alignment
function
Unwinding shaft is pneumatic
tension shaft with *6mm in diameter
Equip with rubber arch flatten
roller and stainless steel roller
(5) Laminating
section
Laminating part has two
pneumatic pressing sections. Up and down rubber rollers press the
film to gypsum board in each pressing section. Upper pressing
rubber roller moves upward and downward by means of cylinder, and
its working pressure is 4kg.
(6) Board
releasing
Cut film manually
after laminating the film on gypsum board.
Gypsum ceiling board *- cutting
machine
1. usage
Cut laminated gypsum board
automatically
Gypsum board size: ***0 x
***0mm
Ceiling board size: **0 x **0mm,
**0 x **0mm
Max. cutting speed:
*5m/min
Installation power: *7.*5 KW
(frequency converter and motor: top brand in China)
Frequency control, transmission
rack, glue spreading and laminating part are driven by chain wheel
and chain. The speed of whole machine is synchronous
operation.
Dimension: ***0 x ***0 x
***0mm
Cutting knife: three in
lengthways, five in lateral
2. Working
craft
Manual board feeding
—longitudinal cutting—lateral transmission—lateral
cutting—board
releasing
3. Machine
component
(1) Feeding board
transmission part
Slant transmission
roller
Transmission rack:
steel channel welding
Transmission
roller: stainless steel roller
Transmission
baffle plate: chrome plated steel board
(2) Cutting
part
Machine board is
welded by *2mm steel board. Machine head feeding board and board
releasing part are transported by rubber roller. Energy from up and
down roller ensures that board moves forward smoothly. Cutting
motor base is welded by steel board, which can be adjusted in
lateral way manually.
Cutting motor
power: 1.5kw
Material for
cutting saw is high alloy saw, which can be used for long
time.
(3) Lateral
transmission
Transmission rack:
steel channel welding
Transmission
roller: stainless steel roller
Transmission
baffle plate: chrome plated steel board
Signal from
photoelectrical switch automatic induction device drives gypsum
board into lateral cutting saw.
(4) Board leasing
part
Transmission rack:
steel channel welding
Transmission
roller: stainless steel roller
Transmission
baffle plate: chrome plated steel board
Electrostatic
Pulse Bag Filter
1. Usage:
The machine is
used to collect the dust from the automatic cutter. It equipped
with large dust exhaust fan and dust exhaust pipe for collecting
dust efficiently.
Machine overall
dimension: ***0 x ***0 x ***0mm
Installation
power: *5kw
2. This
machine includes: dust collector frame, main machine, dust
collector pipe, dust collector motor (8 sets fan), dust collector
bag, deducting frame, pulse controller, etc.
