FOB Price
Obtenir le dernier prix|
Minimum Order
Localité:
-
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
-
Payment Type:
-
Personne àcontacter Ms. maggie
AoAn industry, Other, Zhejiang
There are many plastic stacking chair mold mantufacturers in the world,
different mold Cost, Of course, different mold quality.Let's check
the YOSION plastic chair mold advantage,then you will trust our
technology and quality!
Long
time chair mold life
a. Good plastic chair mold design, mould design is the most
important step for manufacture a good plastic chair mold,
reasonable mould structure, the suitable ejector system, injection
system, cooling system, air venting system, guide system.
b. Choose the suitable steel, DIN1.***8 is very good steel for
chair mold,but because of steel cost,customer use steel P*0 for
chair mold.
c. Choose the best suitable tooling technical, Using big CNC
milling tooling machine and mould press machine.
d. Mould assembling, the chair mold assembling must be very
carefully, check connect of every mould plate; ejector pin,
stripper, eject block or slider should move smooth.
e. Good technichian manual polishing or plus hard chrome plating
keep the chair long time lasting shine.
Good temperature control for Chair mould
Let me introduce chair mould temperature control principle as
follows:
1.The plastic chair mould cooling channel quantities as much as
possible and the channel diameter as big as possible. the distance
between central line of cooling channel and cavity surface is about
****5mm commonly, the distance of cooling channels is **5 times as
cooling channel diameter.the cooling channel diameter is 8mm.
2. The distance between each cooling channel and cavity surface
should be same.the cooling should be add if the plastic part
thickess is not even.
3. The injection gate should be cooling very well.
4.If the cooling channel go through the insert and other connect
mould parts, the important thing is sealing, to avoid any water
leakage.
5. The cooling channel hole do not design to locate in the area
where is the plastic chair Weld Line.
6. The cooling channel diameter according to the everage thickness
of plastic chair,commonly,the cooling channel diameter should less
than *4mm.
Convenience of changing back insert
For plastic chair mold, customer commonly required three back
insert,All back inserts should be easily changed on the
machine.
Easy maintenance for chair mold
a. The chair mold components can be interchangeable in the same
chair mold, it is convenience for maintenance, reduce maintenance
cost and save time.
b. The chair mold has mould legs to protect the mould when keep it
in the floor
High precise tooling size
a. The chair mold tooling size is precise according to drawings
b. The plastic chair size should be as same as 3D product
drawing.
c.Avoid By hand works on the parting area, otherwise you can never
work out a perfect parting line.
Highly production efficiency chair mold
a. The best cooling system for product cooling fast
b. The plastic chair can drop automotive by mould ejector
system
c. All mould actions move smoothly
