Description
Introduction
It is made by stirring and compositing the cement-based
inorganic powder and the double compositions material acrylic
polymer emulsion from the scene / on site. After brushing, the
paint film with high elasticity and high compressive strength has
been shaped, and has boasted the high elasticity of the organic
material and the durability of inorganic material at the same
time.
Applications
It can be used in new and old buildings and structures,
basements, roofing, bridges, reservoirs, ponds, stands, kitchen and
exterior waterproofing works.
Features
It is a kind of non-toxic, tasteless, non-polluting,
environmentally friendly product, and belongs to water-based
product with strong cohesive strength. It can be constructed in the
moist substrate, and its paint film has the features, such as water
resistance, alkali resistance, weathering resistance and
durability. And it has a variety of colors to be chosen from, and
can be made into color film. Also its low temperature flexibility
can be chosen to suit a variety of climatic conditions.
Natures
The product needs to be placed in clean, dry, and airtight
plastic barrels or waterproof paper bags. Its transportation should
be as per the requirement of non-dangerous goods. And in
transportation it should prevent being drenched, insolated,
extruded, collided, and inversed.
This product should be stored in well ventilated, dry and cool
place, avoiding to be exposed directly to the sun. The storage
temperature should not be below 0℃.
According to the product ratio powder and liquid and scope of
application, different products can be divided into type I, II,
â…¢.
I ã€1.0:1.0 suitable for the not long-term immersion
environment.
IIã€1.0:0.5 suitable for the long-term immersion
environment.
â…¢ã€1.0:0.*5 suitable for the long-term immersion
environment.
(The above proportioning is standard one, the detailed one
will be adjusted as per our company data.)
Main
Performances
|
Performance index
|
I
|
II
|
III
|
|
Solid content
|
*0
|
*0
|
*0
|
|
Tensile
strength（MPa）
|
1.2
|
1.8
|
1.8
|
|
Elongation at fracture
(%)
|
**0
|
*0
|
*0
|
|
Water permeability
(0.3MPa,*0min)
|
Impermeable
|
|
Flexibility in low
temperature（Φ*0mm）
|
No crack even at **0
℃
|
Construction
Application
Substrate requirement:
Substrate should be hard, leveled off, solid, clean, free of
sharp horn, free of dust, free of oil stain and free of visible
water.
Ingredient:
Weigh up a certain amount of powder material and place it into
the material mixing bucket, slowly add emulsion material into it
proportionally, then stir them slowly, if you feel the mixture is
too thick and not fit for construction, a little water may be
appropriately added into it, and stir them well before using.
After the substrate is treated well, the first time of paint
can be brushed in the substrate, and after the coating is hardened,
the first time of paint can be brushed along the intersected
direction. If non-woven polyester or glass fiber cloth needs to be
overlaid, when the additional layer is attached, the non-woven
polyester or glass fiber cloth should be permeated, and make it
free of air bubbles.
Dosage:
1.5kg/m***4.0kg/m2, the maximum thickness of the coating for
only one layer security should be not less than 1.5mm.
Note
Don’t construct when the temperature is blow 0℃ or
above *0℃.
Don’t construct until the substrate is clean, solid and wetted
with water, but free of visible water.
Don’t construct in raining and foggy day, and in moist and not
well ventilated environment.
