Description
Mobile racking, is also called power pallet racking, it moves on
the horizontal line through bottom motor equipment, commonly, just
leave one channel distance to make forklift store and pick goods,
as above drawing. Generally, we set up control or switch or remote
equipment, and make the rack move within *0 seconds, the forklift
could enter to pick and store cargos. Besides, this rack with
frequency control capacity can control drive and the speed of
stopping in order to prevent jitter, skew and dumping of goods. In
proper place, equipped with photoelectric sensor localization of
gear motors and brakes, improve positioning accuracy
Features:
1. larger storage than other racks, save warehouse
space;
2. High density storage, generally, each line rack can be composed
of **8 groups rack, not too long and too high, the height is
usually less than 6m, max *2m, specially suitable for low
warehouse. Full use of area space, one of the highest density
racks;
3. Suitable for the goods which are of small types, large quantity,
not suitable for heavy goods;
4. Plan utilization rate is around *0%, space utilization rate is
more than *0% with the change of pallet rack’s layout & the
height of space;
5. Not under first in first out way limit, every cargo can be
directly stored and picked as beam pallet racking, but because of
few channels, although using motor drive equipment to separate the
goods, the flow speed is still decreasing;
6. High cost, slow construction, a little complex to
maintain.
