Description
The washer of diesel vehicle oil tank is suitable for washing the
fuel tanks of diesel vehicle of different style.
While washing the oil tank, it’s needn’t to dismantle fuel tank and
oil pipe , its operation princile is :the diesle oil will be drew
out by the control oil pipe from the tank and entered into the
rough filteration tankfor the primary filter to filter out the
small particle impurities and water, and then pressurized by the
gear pump to enter into the thin filteration tank to filter out the
small particles of ***** clean diesel after two-graddle fiter will
spray to side cavity and dead angles of the fuel tank by high
–pressure nozzle at about 1.5 kg pressure, and misx with the
impurities and oil in the oil ***** t carries on the cycle
fitration at *0 liters flow rate per minute to make the diesel oil
in the fuel tank and the fuel tank reach chean
finally.
method of operation
Method One:direct endless clean method
***** the sprayes bend into a Suitable angle, and
insert it into lateral cavity through
***** the pipeline into the lowest point of the oil tank or clean
the literal corner hole.
3. Turn on the current., adjust the switch to Smooth Shift,
which is the normal clean direction of the clean
washer
4. anipulate the spray boom to spray the intine and dead
corner with the sprayer.
Method two:empty endless cleaning
1.put clean container under the oil tank , Unscrew the plug under
the oil tank to empty the oil tank .
2.plug the pipeline into the oil container , and then insert the
oil-spraying pipe into the oil tank .
3. Turn on the current., and adjust the switch to Smooth Shift
4. move the injector spindle back and forth，which can make the
sprayer under the injector spindle can clean every corner of the
iol tank completely, especially the intine and the dead corners of
the oil tank .
