Description
Mud gauge is specialized in mud pump. Standpipe mud pump. It is
mainly used for the Petroleum, coal, chemical industry, drilling
Mud Pump Pressure gauge is extremely important to the drilling
process. The Mud Pump Pressure Gauge enables the driller to monitor
the pressure while drilling. Any unusual change in pressure will
alert the driller of down hole problems. Pressure too low could
indicate washed out pipe or bit nozzle, loose joint or broken drill
string, worn pump packing or liners, or lost returns due to
formation breakdown. Pressure too high could indicate a plugged
drill bit or an increase in mud density or viscosity. Reliable
indication of mud pump pressure provides an early warning of
circulation problems, enabling the driller to make corrections
avoiding major problems.
Specifications
1. Model: F series.
2. Measurement range: 7, *6, *5, *0, *0, *0, **0, **0, **0 MPa.1,
**0, 2, **0, 3, **0, 5, **0, 6, **0, *0, **0, *5, **0, *8, **0, *3,
**0 full of range PSI etc.
3. Accuracy grade: 1.6, 2.5%
4. Linking thread: 2 inch NPT male, 1.5, 1 inch NPT female or
M*0X1.5 etc.
5. Case: Fluid filled
6. The use of the Gauge is allowed under the environment with the
temperature ranging for **0~**0 Celsius degree.
To Order Specify:
Measurement Range
Linking Thread
Model number
Note:
Install the gauge vertically and keep the nearest to the measured
unit
Please consider temp. Error when ambient temp. Deflects from *0(5)
Celsius degree.
Loosen oiling screw to release inner pressure in operating.
Measurement range, Linking thread etc especially that is
customized.
