FOB Price
Obtenir le dernier prix|
Minimum Order
Localité:
-
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
-
Payment Type:
-
Personne àcontacter Mr. Mark
Xiajiao, Huizhou, Guangdong
PRODUCT NAME ：Battery Heater
PRODUCT DESCRIPTION ：
Product Features:
Made of silicone covered for
resistance to acid and oil and
low (**0C) and high (**0C)
temperature.
Thermostat controlled to prevent
overheating the battery, and to
maintain it at the optimum
temperature (Optional)
Flexible, portable, reliable and Pliable
for easy installation, no mechanical
ability required
Fits most car and truck
batteries
Wide range of sizes in both
**0 volt and **0 volt (optional)
Extends the life of the
battery
Product Specifications:
Brand: Honeywon
Product Name: Battery Heaters
Size: **0mm X **5mm X 1.5mm
or to be customized
Voltage: *8v or to be customized
Wattage: *0w or to be
customized
Technical Parameters:
1 ）Maximum
temperature resistance
of insulator：**0C
2 ）Maximum
operation temperature：
**0C
3 ）Insulation
Resistance：≥**0 MΩ/DC
***0V
4 ）Breakdown
Voltage：≥ AC***0v/5S
5 ）Capacity
Tolerance：±5%
6 ）Temperature range:**0C~**0C
for continuous heated, Heating element:both
etched foil and wire-wound element
available.
7 ） Dimension:Maximum 1.2m
x Xm, Minimum:1.5mm x 1.5mm, standard
thickness:1.5mm (thinnest:0.8mm, thickest:4.5mm),
Lead wire length:standard **0mm.
Product Description
A battery can lose *0% of
its starting power when the
temperature reaches *-degrees F. Cold
engines require more power
from the battery at these
temperatures. These two factors make
it imperative that you use a
battery pad heater to extend
the life of your battery, and
assist in your cold weather
starting requirements. Fully charged
batteries have a significant
drop in power at colder
temperatures. The battery wrap allows
you to have full cranking power
regardless of the cold.
The battery heater should not
be used when the temperature is
above freezing.
Installation Instructions:
1. Loosen or remove battery, hold
down bolts
2. Wash off sides of battery-wipe
dry
3. Wrap blanket around battery, pull
tight at corners, and tie with
tapes provided
4. Tighten battery hold-downs
5. Run cord to front grille, taping
where necessary.
Warning:
Keep printed side out.Do not
overlap and energize only when
applied to battery.
Do not operate when outside air
temperature is above freezing
(*2F/0C).
