FOB Price
Obtenir le dernier prix|
Minimum Order
Localité:
-
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
-
Payment Type:
-
Personne àcontacter Ms. Jassie
Huangshan, Hefei, Anhui
Low profile power inductor Low DCR SMD power inductor Large-current up to *5A SMD power inductor SMD Magnetically shield Power inductor Shielded SMD power chip inductor Magnetic shielded surface mount inductor with high current rating Low profile and shielded very effective in space-conscious applications Low resistance to deep power loss minimum Operating temperature: **0 to *5 degrees (contain heating coil) Appearance inspection: no external defect by visual inspection Terminal strength: after soldering, between copper plate and terminals of coil, push in two directions of X, Y with standing as below conditions Terminal should not peeled off Heat endurance of reflow soldering: **0 Insulating resistance: over **0M Ohms at **0V DC between wire and core Dielectric strength: no dielectric breakdown at **0V DC for one minute between wire and core Temperature characteristic: Inductance coefficient (0 to 2, **0) x ***6/(**5 to **0) inductance deviation within +/*5.0%, after *6 hours Humidity characteristic: in *0 to *5% relative humidity at *0+/*2 and one hour drying under normal condition. Inductance deviation within +/*5.0% after vibration for one hour Vibration resistance: in each of three orientations at sweep vibration (*******0Hz) with 1.5mm p-p amplitude Similar to coil craft and Toko, Sumida, TDK and Murata brands
