UF Membrane Component By Hong Kong Source International Limited Co., China
Pas encore membre de TradeKey.com? Inscrivez-vous pour vous connecter avec 9 millions d'importateurs et exportateurs. Rejoignez-le maintenant c'est gratuit |
BOOK A CALL
Book Call On Your Favorite Time

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

Contact Us
UF Membrane Component

UF Membrane Component

|

Minimum Order

Localité:

Xiamen Port

Prix de commande minimale:

-

Commande minimale:

50 Sets

Packaging Detail:

-

Delivery Time:

-

Supplying Ability:

200, 000 Sets Per Month

Payment Type:

-

Contacter maintenant
Membre gratuit

Personne à contacter Ms. Mavis

Detai 51, Quanzhou, Fujian

Contacter maintenant

Description

Hollow-fiber Ultrafiltration Membrane Module SRUF***0 Pure Water Flux:****0L/H, more are available A:The characteristics of Ultrafiltration technology: -UF tech. is an efficient and environmentally, energy-saving separation process -Using lower pressure as a driving force -UF separation process is on under room temperature, low energy consumption -The scale and handle ability range of UF process is large B:Suoai Membrane Fairy: SRUF***0 1.PERFORMANCE PARAMETERS 1.1 Membrane material Polyvinyl Chloride(PVC) 1.2 Molecular Weight Cut-off(MWCO) *0.*****0.**0 Dalton 1.3 Inner and outer diameters of hollow-fiber 0.9mm/1.6mm 1.3 Membrane fiber type Inside-out hollow-fiber 1.4 Charateristics of membrane structure Hydrophilic double-compact layers 1.5 Dimensions of membrane module **0****7mm 1.6 Area of membrane module *0m2 1.7 Pure water flux ****0L/H 2.APPLICATION CONDITIONS 2.1 Pre-filtration *****0um 2.2 Max. turbidity of inlet water <=*5NTU 2.3 Rate flux *****0L/M/H 2.4 Running mode Cross-flow filtration or dead end filtration 2.5 ***** water pressure 0.*5MPa 2.6 Pressure difference of transmembrane at *0°c(TMP) *****0KPa 2.7 Max.Pressure difference of transmembrane 0.2MPa 2.8 Applicable PH range ***2 2.9 Applicable temperature 5°c 2.9.1 Tolerable continuous residual chlorine **0PPm 2.9.2 Tolerable interval residual chlorine **0PPm 3.BACKWASHING DESIGN 3.1 Backwashing pressure 0.*5MPa 3.2 Backwashing flow ******0L/M/H 3.3 Backwashing frequency Every****0 minutes 3.4 Backwashing time ****0 seconds every time 3.5 Frequency of chemically enhanced backwashing(CEB) Auto adding of additives in backwashing is recommended 3.6 Time of chemically enhanced backwashing(CEB) ****0seconds every time ***** WASHING DESIGN 4.1 Frequency of chemically washing every**4months or when TMP is over0.*5MP

Send a direct inquiry to this supplier

To:

Ms. Mavis < Hong Kong Source International Limited Co. >

Je veux savoir: