Description
tape ruler cable for measuring water level
gauge is the most accurate method to measure the water level. It is
usually used to measure the water level of wells, boreholes and
water level pipes. It is especially suitable for the observation of
the groundwater level in hydropower projects or the manual
inspection of the saturation line of the dam body of the upper rock
dam.
The measurement and reading of the tape
ruler cable for measuring water level gauge consists of two parts:
first, the buried part of underground materials, the water level
pipe and the bottom cover (purchased separately); second, the
ground receiving instrument - the steel ruler water level gauge,
which consists of the probe, the steel ruler cable, the receiving
system and the winding coil, etc.
The second part is our professional design and
production of tape ruler cable for measuring water level gauge:
1. Probe part: made of stainless steel, with water
resistance contact point installed inside. When the contact
contacts the water surface, the receiving system will be connected.
When the contact leaves the water surface, the receiving system
will be closed by door movement.
2. tape Steel ruler cable part: the steel ruler
and wire are combined by plastic technology, which not only
prevents the steel ruler from rusting, but also simplifies the
operation process, making the measurement and reading more
convenient and accurate
3. Receiving system: it is composed of a sound device
and a peak value indicator. The sound device sends a continuous
beep sound from the beep device. The peak value indicator is a
voltmeter pointer indicator. The two can be selected by turning the
switch. No matter which receiving system is used, the reading
accuracy is the same
4. Winding coil part: composed of mountain winding
disc and bracket, the receiving system and battery are all placed
in the core cavity of the winding coil, and the steel ruler cable
is wound outside the cavity.
