FOB Price
Obtenir le dernier prix|
Minimum Order
Localité:
-
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
-
Payment Type:
-
Personne àcontacter Ms. lucy
Nankai Avenue,Hi-tech Development Zone, Tangshan, Hebei
Uses: a. During the dense medium coal separation processing, the tailings coal after clean coal separating is concentrated and then put into the electromagnetic screen, the screen will put out clean coal; the tailings coal after medium-clean coal separating is concentrated and then put into electromagnetic screen, the screen will put out medium-clean coal. b. When jigging separating the clean coal screen is put into water or centrifugal liquid is poured into the electromagnetic screen, the screen will put out clean coal. c. Add electromagnetic screen in the front of flotation separator, use the electromagnetic screen to recycle coarse coal slime, then the screen is put into water, put flotation separator or flotation column, this can make up for the shortage of capacity of the flotation separator or flotation column and coarse size. d. The spillover of the clean coal is concentrated to dehydration in order to recycle coal slime. e. In the water coal slurry separating coarse coal to prevent nozzle blocking. f. Iron ore fines grading for mineral processing factory. Technical features: a. The screen has unique vibrating, that is, the screen deck is vibrating but the screen frame not. The screen adopts beating screen mesh to transmit vibration. At the same time the mesh is cleaned, so the hole is not easy to be blocked. The equipment has no vibrating influence on the floor. b. The screen has high vibrating frequency and strong vibrating ***** intensity can reach ***0g. This type of frequency is very suitable for coal slurry dehydration and particle grading. c. The equipment realizes automatic numerical control. The amplitude can be adjusted in sections and on line. d. The total machine is energy-saving and low power-consumption. e. It has big scope of the screening and high recovery. f. It has high reliability and low failure rate. The machine only need replace the mesh timely during routine maintenance.
