FOB Price
Obtenir le dernier prix|
Minimum Order
Localité:
-
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
-
Payment Type:
-
Personne àcontacter Ms. Jane
laodong Rd, Shanghai, Shanghai
Usable Range ES *3 air grinder is mainly used for grinding like gate, riser, medium machine parts, mould and melding joint. Using cotton wheel instead of grinding, you may do polishing. Using wire wheel instead of grinding, you may do cleaning rust of the surface of metal and old paintcoat. Technical Parameter see follow Usable attention 1 maintenance A. check the grinder carefully, and apply grease to it. b. Pipe should be well and ventilate before connect this tool, blew away the dusty inside of the pipe. Make the connection tightly. c. The air pressure should keep on 0.*3Mpa, and clean it. If the air pressure too high, it will strength the abrasion and to effect the life, if the air pressure too low, it will effect the efficiency. d. The pipe should equip filter, reducing valve, and oil sprayer. If the pipe didn&#**9;t equip oil sprayer, you should apply grease from the connected pipe two to four times everyday. The bearing should coat grease twice every month. e. This product can&#**9;t be thrown at will, in case of destroy it, if so will effects the functions. f. If there was a fault, you shouldn&#**9;t dismantle it at spot, you should send it to repairing department to check in time. g. After work, you should clean the tool and apply enough grease, make it rolling slowly for a few seconds, and restore it well. 2 Technical safety a. The machine should be checked regularly to see if all the screw is tightly, especially the screw of the front of grinding wheel. B. The diameter of the grinder should be meet the regulation. It is better to use strengthed fiber grinder. The pressure of grinder and workpieces shouldn&#**9;t be too high and the grinder mustn&#**9;t strike the workpiece in case of the explosion of grinder or break the grinding wheel. C Before using it, the new equipped grinder should be grinding the old at slow speed until it was g rinded well. D The protection piece shouldn&#**9;t be discarded during using in case of danger. Model Max Grinder Siz
