FOB Price
Obtenir le dernier prix|
Minimum Order
Localité:
China
Prix de commande minimale:
-
Commande minimale:
20 Metric Tons
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
200Metric Tons / Month
Payment Type:
-
Personne àcontacter Mr. Fang
Shuangyang, Linghai, Liaoning
International Standards:EN**0 A AR 1 *8 AC H5 GB/T ********9 F5A*-H*8A AWS A5.******4 F7A*-EL8 Introduction WD-SJ**1 is an agglomerated aluminate-rutile type soldering flux for submerged arc welding with a basicity index of BIIW 0.5. The flux is spherical granular, grain size is from *0 to *0 ***** is suited to twin-wire, tandem and multi-wire welding at high speeds, the welding speed is more than **0cm/min. It is particularly useful for welding tube-web-tube joints of finned tubes. It has excellent welding technology properties. Regularly shaped welds are deposited without reduction of area or interface notches. Slag detachability is good, welding blowholes scarcely ***** special production method ensures that the flux has low moisture pick-up and granular stability. Flux shall be capable of meeting the applied requirements. As the bulk density is low, so is the consumption rate. Applications Flat butt and fillet welding of Q**5 for steel frames, bridges, spiral pipes, pressure vessel and ships. Characteristics It is suited to welding steel plate of less than *0mm. Slag is easy to remove, bead appearance is beautiful, welding defects such as pits and blowholes scarcely occur in high speed fillet welding. Main Constituents (%) SiO2+TiO2 Al2O3+MnO CaF2 S P *5 *5 5 ≤0.*6 ≤0.*8 Typical mechanical property of deposited metal Matching wire Yield strength(MPa) Tensile strength(MPa) Elongation(%) Charpy V notch impact strength(J) F7A*-EL8 ≥**0 ******0 ≥ 0°C ≥ Typical chemical composition of deposited metal(%) Matching wire C Si Mn S P F7A*-EL8 0.*7 0.*0 1.*2 0.**2 0.**6 Notice: 1. Before welding, flux must be baked for 2 hours at temperature of ******0°C. 2. Remove rust, oil, moisture and etc. from the weldment.
