WD-SJ101 Agglomerated Flux For S.A.Welding By Jinzhou Wonder Welding Material CO., LTD., China
Pas encore membre de TradeKey.com? Inscrivez-vous pour vous connecter avec 9 millions d'importateurs et exportateurs.
Rejoignez-le maintenant c'est gratuit |
BOOK A CALL
Book Call On Your Favorite Time

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

Contact Us
WD-SJ101 Agglomerated Flux For S.A.Welding

WD-SJ101 Agglomerated Flux For S.A.Welding

|

Minimum Order

Localité:

China

Prix de commande minimale:

-

Commande minimale:

20 Metric Tons

Packaging Detail:

-

Delivery Time:

-

Supplying Ability:

200Metric Tons / Month

Payment Type:

-

Contacter maintenant
Membre gratuit

Personne à contacter Mr. Fang

Shuangyang, Linghai, Liaoning

Contacter maintenant

Description

International Standards:EN**0 A FB 1 *7 AC H5 GB/T ********9 F4A*-H*8A AWS A5.******4 F6A*-EL8 F5A*-H*0Mn2 F7A*-EH*4 GB/T *********3 F*5A*-H*8MnMoA AWS A5.******4 F8A*-EA*-A1 Introduction WD-SJ**1 is an agglomerated fluoride-basic type soldering flux for submerged arc welding with a basicity index of BIIW 1.8. The flux is spherical granular, grain size is from *0 to *0 mesh.As weld metal is very purity, the diffusible hydrogen content in deposited metal is less than 5ml/**0g, so has very good toughness at the low temperature, therefore, crack resistance is extremely high. WD-SJ**1 assures excellent weldability, bead appearance is beautiful, slag is extremely easy to remove. WD-SJ**1 is suitable for submerged-arc twin-wire, tandem and multi-wire welding as well as for welding with the two-run technique. The special production method ensures that the flux has low moisture pick-up and granular stability. Flux shall be capable of meeting the applied requirements. As the bulk density is low, so is the consumption rate. Applications Flat butt and fillet welding of mild and high tensile strength steels for frames, bridges, pipes, pressure vessels, rolling stock, offshore structures and ships. Characteristics It has excellent welding technology properties for fillet welding of thick plates. Regularly shaped welds are deposited without reduction of area or interface notches. Blowholes scarcely occur.Satisfactory weldability and mechanical properties are obtained with heat input. Main Constituents (%) SiO2+TiO2 CaO+MgO Al2O3+MnO CaF2 S P *0 *0 *5 *0 ≤0.*6 ≤0.*8 Typical mechanical property of deposited metal Matching wire Yield strength(MPa) Tensile strength(MPa) Elongation(%) Charpy V notch impact strength(J) F6A*-EL8 ≥**0 ******0 ≥*2 0°C ≥*0 **0°C ≥*4 **0°C ≥*4 H*8MnA ≥**0 ******0 ≥*2 0°C ≥**0 **0°C

Send a direct inquiry to this supplier

To:

Mr. Fang < Jinzhou Wonder Welding Material CO., LTD. >

Je veux savoir: