Gas Vehicle gas leakage alarm CCLL9518-T.K2 By Yingkou WenRui Import And Export Co., Ltd., China
Pas encore membre de TradeKey.com? Inscrivez-vous pour vous connecter avec 9 millions d'importateurs et exportateurs.
Rejoignez-le maintenant c'est gratuit |
BOOK A CALL
Book Call On Your Favorite Time

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

Contact Us
Gas Vehicle gas leakage alarm CCLL9518-T.K2

Gas Vehicle gas leakage alarm CCLL9518-T.K2

|

Minimum Order

Localité:

-

Prix de commande minimale:

-

Commande minimale:

10

Packaging Detail:

-

Delivery Time:

-

Supplying Ability:

200

Payment Type:

-

Contacter maintenant
Membre gratuit

Personne à contacter Ms. Susan

Bayuquan, Yingkou, Liaoning

Contacter maintenant

Description

Operating voltage: *4V&plusmn; *0% Working Current: &ge; 0.8A, Environment temperature: **0~*0&ordm; C Detector quantity: **8PCS Normally we use four detectors for General passenger buses, Type of Gas Alarm concentration Natural Gas ***0ppm &plusmn; 3%LEL Liquefied petroleum gas ***0ppm &plusmn; 3%LEL Hydrogen **0ppm &plusmn; 3%LEL H CO According to H, CO tothe proportion 2 Operation 2.1Normal alarm: This system will automatically enter the monitoring state without any action as soon as it connect power, For normal alarm the controller will send a intermittent call, while an alarm position indicator flashes, it means that the concentration of gas exceed standard, if the alarm continue for more than a certain time after the control module to work (the light from green to red). To turn off the gas valve or change into Fuel conditioning automatically(depending on connection location). Please check the leak source and find the causes of leakage, Restoring normal conditions automatically after the alarm stops. 2.2 Fault Alarm; This device has a failures self-checking system, if the detector cable bad or the sensor in detector open circuit, short circuit, the controller will send intermittent sound, at the same time, the fault indicator light flash, to observe the location of alarm lights, the lighting position is the fault location. Please check your connection cable, if the connection is not wrong, replace the detector. 2.3Mute; Press the mute key <<Mute>> the alarm sound is prohibited, until the next alarm. 2.4 Reste; If the car is disturbed by an outside interference (such as the exhaust of other vehicles, gas input time) and cause the alarm. When you are sure the leakage is not from your car, press the reset key <<Reset>> so that control module to stop working for **5 minutes. At this period of time drive the vehicle out of the scene.

Send a direct inquiry to this supplier

To:

Ms. Susan < Yingkou WenRui Import And Export Co., Ltd. >

Je veux savoir: