FOB Price
Obtenir le dernier prix|
Minimum Order
Localité:
-
Prix de commande minimale:
-
Commande minimale:
4.2
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
300t
Payment Type:
-
Personne àcontacter Ms. lily
zhongyuan, Zhengzhou, Henan
Our company introduces advanced technology from abroad to manufacture aerated-concrete making ***** equipments can produce aerated blocks and slabs no more than 6 meters.According to their different cutting technologies, they can be devided into two kinds: Hydraulic turning-over cutting machine and airspring cutting machine. Supplying fly ash aerated block and slab whole set equipments that are applicable to the annual output of *0 **0 CBM to **0 **0CBM; Supplying sand areated block equipments and whole set equipments that are applicable to the annual output of *0 **0CBM to **0 **0CBM; Supplying aerated concrete and block equipements as well as referencial program , which that can be used for annual output of *5**5 thousand CBM. The Development and Features of AAC: AAC has a history of one hundred of years and has become the pillar industry in construction ***** our country aerated technique have been developed for about *0 years, and its technique skills and equipements are becoming ***** AAC has the features of light bulk density, good thermal insulation properties and sound-absorption, certain strength and process ability, and its raw materials is very rich, especially the reuse of fly ash enables the comprehensive utilization of industrial residue, curb environmental pollution, no destroy on farmland, creat good social and economic benefits.AAC is a ideal alternative of the traditional clay brick wall ***** many years AAC has been strongly supported by national wall reform policy, tax policy and environmental ***** a sentence, AAC has been an important factor in new building materials and has a broad market prospect. II.AAC Processing Technics: 1.Storing and supplying of raw meterials of AAC blocks. All raw meterials are carried into factory by ***** ash, sand or lime are gathered in specified raw materials field waiting for using.Sacks of cement and bulk cements stored in cement ***** and aluminum powder are seperatedly keeped in chemical warehourse and aluminum warehourse.When used, these raw materials are carried into workshop respectively. 2.Processing of raw materials: Quick lime is sent by vibrating feeder and belt conveyor into jaw crushers to smash. Smashed lime is sent into lime silo by bucket elevator and then is transported into ball mills by screw conveyer. Fined materials are sent into proportion bin by screw conveyer and bucket elevator. Aluminium powder is lifted by a truss motor to second layer of batch planta and empty into ***** quota water is poured to make aluminium powder into suspension. 3.Aerated block Ingredients, Stiring and Casting Flyash (or sand or stone powder )and waste slurrry are measured in mesuring tank.After the measuring and mould in their place, slurry stirring begins.Slurry temperature should reach about *0°-This is technical ***** the actual temperture doesn’t arrive *0°, vapor is used in the measuring tank to raise temperature.Half or one minutes before casting, aluminium suspension is supposed to be added to the slurry. 4, Pre-curing and Cutting Process Cut model is conveyed to precuring room for gas forming. Room tempreture should range from *0°to *0°.This period lasts one hour and a half totwo hours.(If materials take on geographical advantages, this precuring can be eliminated.Precured green body together with mould frame will be lifted to cutting station that is covered by autoclave board.After frame detachment, cutting machine do cross-cutting, vertical cutting, face-milling and tip-binding. At the same time, die grid is hanged to precuring cart for manual cleaning and degresing to prepare for the next perfusion. The cutting ready embryois are carried to precuring cart together with die seat, palletizing in two tiers, four pillars between two the tiers, and get into grouping process. When the cutting of body is completed, partial waste materials cut down will be processed into waste material slurry which then will be pumped to the slurry tank located at the topmost story of batching building, after that, add the necessary raw material, then transported into a pulping machine for reuse. 5, Autoclave and End-products After the greenbody is grouped, open autoclave door, a hoist will draw out autoclave cart;Put all green body on the cart and wind the cart back into the autoclave for ***** products will be carried by a bridge crane to a stockyard, then to a products dump by fork lorry ***** empty card together with autoclave bottom is lifted to return-line cart and winched back for another circle.
