Sell PC hammer crusher

Description

Performance features 一、It is the third-generation new breaker and collects broken stone materials and the reshaping together , compared with the under-medium-hardness breaking and reacting, it can save investment by more than *0%, the finished product rate is above ****0%, the grain shape is good, the powder is lower than****0%. 二、As adopting the technological design, compared with the same type of product, the yield is higher, the rate of finished product is higher, the energy consumption is lower, and the quality surpasses the similar products. 三、The product takes the principle of "Quality superiority", mainly has six advantages.①The body uses gas to protect the welds, through the technological performance of vibrating expiration, the toughness of structure is stronger.②Rotating parts are processed and with quality-adjusting treatment by the numerical control ***** toughness is higer. ③The hammer plate was processed by the high-toughness materials, through the overlaying treatment, the appearance is more anti-resistance.④The hammer head use the pure high-chromium alloying ***** tensile strength and the wear-resisting property is better.⑤The screen board and the protecting board use the design idea, the anti-hit, the resistance to wear is stronger.⑥The outlook design and the strengthened intrinsic quality make the performance to be more superior. Applicability: 1. Widely applied to the *-step, *-step break of all sorts of materials whose compressive strength is under medium hardness. 2. Especially be used for the materials’ break in mine, building materials, roads&bridges, chemical industry and metallurgy. Specifications: Model Max. Feed Size (mm) Discharge Size (mm) Capacity (t/h) Motor power (KW) PC****8 ≤**0 <*0 ****0 *5 PC****0 ≤**0 <*0 ****0 *5 PC****0 ≤**0 <*0 *****0 *0 PC****0 ≤**0 <*0 *****0 **0 PC****2 ≤**0 <*0 ******0 **2 PC****3 ≤**0 <*0 ******0 **0 PC****3 ≤**0 <*0 ******0 **0 PC****3 ≤**0 <*0 ******0 **0 PC****3 ≤**0 <*0 ******0 **0 PC****5 ≤**0 <*0 ******0 **0 PC****5 ≤***0 <*0 ******0 **0 PC****5 ≤***0 <*0 ******0 **0 PC****5 ≤***0 <*0 ******0 **5 Remarks: 1. The data listed above is by the standards of the following: the limestone’s break, the humidity ≤8%. The power’s allocation is chosen according to the actual broken demands. The variable data won’t be forecasted by themselves. ***** feeding quality, feeding shape and grain size etc. elements will affect the machine’s processing ability.