FOB Price
Obtenir le dernier prix|
Minimum Order
Localité:
-
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
-
Payment Type:
-
Personne àcontacter Ms. Sterry
Longhua, Shenzhen, Guangdong
GM Tech*2 PRO Kit The Tech*2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems ***2 thru ***8 Features: Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles. Support for on-board diagnostics on all GM systems ***2 thru current year. Removable hardware modules provide insurance against scan tool obsolescence. Large, easy-to-read backlit screen. RS**2 & RS**5 ports provide the avenue to connect future devices to your Tech 2 Flash. Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review. Ability to view the status of vehicle diagnostic tests as they run. Bi-directional The authentic GM ****-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics. Vetronix Tech*2 Specifications Microprocessor *2 bit, *6 MHz Memory *2 MB flash type II PCMCIA. Type III slot available for future expansion. Communications Integral RS**2 communication port. Screen 3.8 .8 backlit monochrome with full graphics capability: **0?*0 pixels. Displays up to 9 vehicle parameters at once GM Tech*2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and NEW!): Tech*2 Flash Tester *2 MB PCMCIA Card with GM OE Applications CAN diagnostic interface module(CANdi) and instruction sheet download ( **9.2 kb ) GM aftermarket Expertec TIS software on DVD-ROM disks TIS***0 dongle to access SPS/Security features Data/Sensor/Trouble Code Manual DLC Cable, DLC Loopback Adapter *2V Cigarette Lighter Power Cable SAE *6/*9 Adapter NAO *2/*9 Adapter Battery Power Cable Storage Case Tech*2 Users Manual An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.
