Description

Appliance connection (use as single one) 1. Attention the positive pole and negative pole when wiring. Connect the “O” terminal of red clip to the red terminal of the inverter and the “O” terminal of black clip to the black terminal of the inverter, then connect the red clip to positive pole of DC power and the black clip to the negative pole of DC power. 2. Switch on the inverter. If the indicator LED is green, it means it works properly, if the LED is red, and alarm will beep, it means the inverter is faulty and if so please turn off the inverter immediately and check the inverter. 3. Insert the appliance plug into the inverter outlet. Switch on the inverter. If the indicator is green, the appliance can work properly. The inverter has soft-start function. 4. When the inverter is working, if the alarm beeps, the indicator LED would take red, which means the inverter is faulty. Corresponding fault can be identified as shown in Section System Display of Specification. After fixing the fault, you can restart it. Working environment 1. Operation temperature: **0℃~*0℃. 2. Storage temperature: **0℃~*5℃. 3. Considerable air humidity should be less than *5%. 4. No electrical conductivity, dust explosion, corrosion-free gas in the working place. 5. No shock and vibration in the working place.