hot rolling mill

Description

Single stand and double coilers aluminium hot rolling millï&frac*4;Œwhich can roll ******0mm thickness casting slab into 5mm thickness strip at finally through multi-passes rolling. Its rolling stand with big rigidity can avoid impacting effectively and enhance stability of rolling. The design of rolling rolls Dia. are fully concerned about its bigger pressing value. the improvement of the roll’s cleaner satisfy the requirement of the surface quality of working roll for guarantee optimize surface of strip. The screw down method is adopted with electromotion combined with hydraulic AGC methodï&frac*4;Œwhich can implement adjust the gap of rolls by rough combined with precision regulation. The electric control system is adopted with programmable controller. The main bus internet technology on site is equipped with advanced technology and high automation level. Main technical parameters for equipment Item Name Technical parameters Rolling mill parameters Material Rolled ***0, ***0, ***0, ***0 series, Casting ingot thickness mm **0—**0 Casting ingot width mm *******0 Casting ingot length mm ********0 Casting ingot weight g Max ****0 Rolling mill parameters Finishing product thickness mm Hot rough rolling: ***0 Hot finishing rolling:**6mm Rolls length mm Max ***0 Rolling speed m/min 0/*0/*0/**0/**0 Thickness control system Electromotion screw down+ hydraulic AGC Typical mill ï¿ **0×********0; ï¿ **0/ï¿ ***0×********0ï&frac*4;›