FOB Price
Obtenir le dernier prix|
Minimum Order
Localité:
-
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
-
Payment Type:
-
Personne àcontacter Ms. Wanda
Yuanfei road, Weifang, Shandong
Product Description Characteristic E-light machine is combined with IPL and RF, so it can decrease burn risk and uncomfortable feeling significantly without side effect. ________________________________________ Theory It combines three advanced technologies: Bipolar Radio Frequency + IPL +Skin Contact Cooling. When the three are united in one treatment, wonderful treatment experience and result can be expected. The energy of Radio Frequency can reach the middle and deep layer of the skin and heat up tissue, thus, lower energy is applied during the IPL treatment. Uncomfortable feeling during the IPL treatment will be decreased significantly and better result can be expected. In addition, cooling system involved in E-light can also ease the uncomfortable feeling. The absorbing of the energy of radio frequency is not concerned with melanin. So, the E-Light treatment can get good result on the soft or thin hair so as to decrease the risk caused by traditional IPL treatment. ________________________________________ Parameters Technical Specification: E-LIGHT B3+ IPL Treatment System with RF function Handle: IPL treatment head, Bipolar RF treatment head, E-light (IPL+RF) treatment head Light Source: Intense Pulsed Light Wavelength: **0/**0/**0/**0~***0nm (IPL+RF Standard) **0/**0/**5~***0nm (Optional) Spot size: 8 x *0 mm2(IPL), *2 x *0 mm2 (IPL+RF); *2x*5 mm2 (IPL+RF) Φ *5(RF), Φ *2 (RF) Cooling System: Air & Close Water Circuitlation & Treatment head with semiconductor cooling temperature adjustable IPL Light Energy: *0~*0 J/cm2 RF Energy: 1~*0MHz (Bi-Polar) Pulse Duration: 2~*5ms Pulse Sequence: 1~*5 pulses (adjustable) Pulse Delay Time: 5~*0 ms Integrated Skin Cooling: *4 degree to **0 degree Operative LCD Interface: TFT True Color LCD touch screen IPL Power: 1, **0w USB Port: Upgrade LCD software by USB port built in the machine Electrical Source: **0V / *0Hz or **0V *0Hz If you have machines know
