charger B6V10 By Shenzhen Bohang industrial Co.Ltd, China
Pas encore membre de TradeKey.com? Inscrivez-vous pour vous connecter avec 9 millions d'importateurs et exportateurs.
Rejoignez-le maintenant c'est gratuit |
BOOK A CALL
Book Call On Your Favorite Time

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

Contact Us
charger B6V10

charger B6V10

|

Minimum Order

Localité:

-

Prix de commande minimale:

-

Commande minimale:

-

Packaging Detail:

-

Delivery Time:

-

Supplying Ability:

-

Payment Type:

-

Contacter maintenant
Membre gratuit

Personne à contacter Ms. Yuki

Room 311, south shang bu gang mao building, zhenxing road, Shenzhen

Contacter maintenant

Description

User&#**9;s setting-up parameters Lithium battery type LiIo:3.6V, LiPo:3.7V, LiFe:3.3V NiCd Delta-peak voltage sensitivity 5 to *0mV NiMH Delta-peak voltage sensitivity 5 to *0mV Battery temperature cut-off Off, *0 to *0C Waste time between charge/discharge cycle 1 to *0 minutes. Trickle charge mode ON/Off, up to **0mA Integral timer limit for safety Off, *0 to **0 minutes Maximum charging capacity limit for safety Off, *0 to ***0 minutes Key beep and buzzer sound ON/OFF Input power low alert *0 to *1V LCD back-light brightness 1 ~ **0 steps - Operating software Every operating program in the unit is controlled with mutual links and communications to prevent every possible error, so it introduces the maximum safety, such as input voltage warning, reverse polarity protection and Lithium cell-count input error warning. - High-power and high-performance circuit B**0A employs the circuit that has maximum output power of **0Watts. As a result, it can charge or discharge up to *8 cells of NiCd/NiMH and 6 series of Lithium batteries with maximum current of *0A. Furthermore, the cooling system is so efficient that can hold such a power without any trouble of running the circuit or the operating program. - Individual voltage balancer for Lithium batteries inside B**0A has an individual-cell-voltage balancer inside. So it does not need any balancer separately when charging Lithium batteries (LiIo/LiPo/LiFe) for cell voltage balancing ** When the &#**9;Balance charge&#**9; mode being performed, the balancing adapter should be connected to the balancing tab of battery pack, as well as the charger&#**9;s charging lead should be connected to the output of battery pack. And also, please pay attention to the polarity of the battery pack&#**9;s output which goes to the charger&#**9;s output. If it is reversed, the short-circuit can be happened on the battery pack. - Accept various types of Lithium battery BC8 can accept three types of Lithium batteries - L

Send a direct inquiry to this supplier

To:

Ms. Yuki < Shenzhen Bohang industrial Co.Ltd >

Je veux savoir: