FOB Price
Obtenir le dernier prix|
Minimum Order
Localit:
-
Prix de commande minimale:
-
Commande minimale:
10
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
-
Payment Type:
-
Personne à contacter Ms. Reany
FuMing, Shenzhen, Guangdong
digital satellite receiver DM***-S Features: ï¬ **0 MHz IBM PowerPC Processor (**0 Mips) ï¬ Linux operating system ï¬ 1 card reader ï¬ MPEG2 hardware decompression ï¬ DVB-S, DVB-C ï¬ V.*4/RS**2 interface ï¬ **0Mbit Ethernet interface two-way ï¬ 2 LED instructions ï¬ Unlimited number of TV / radio channel list ï¬ Channel switching time less than 1 second ï¬ Full automatic service scan ï¬ EPG (Electronic Program Guide) ï¬ Support for DiSEqC ï¬ Multi-lingual ï¬ The number of bit-stream output SPDI / F interface (AC*3 / DTS) ï¬ 1 European Scart plug (software control) Technical parameters: DBC-Tuner: ï¬ IF input :*******0 MHz ï¬ Signal Level - *5 dBm ***** - *5 dBm ï¬ Signal-to-Noise *2 dB maximum. ï¬ Mother of the first socket F ï¬ *5 ohm input impedance ï¬ AFC + / - 3 MHz ï¬ QPSK ï¬ The scope of input symbol rate 2 ***** *5 M, SCPC / MCPC ï¬ Forward error correction 1 / 2, 2 / 3, 3 / 4, 5 / 6, 7 / 8, automatic Video decoder: ï¬ MPEG*2 and MPEG*1 compatible ï¬ PAL G / *5 Hz standard ï¬ Video proportion of 4:3 / *6:9 (automatic) Audio decoder: ï¬ MPEG*1 & MPEG*2 Layer I and II ï¬ Stereo ï¬ Frequency: *2 kHz, *4.1 kHz, *8 kHz, *6 kHz, *2.*5 kHz, *4 kHz Analog output: ï¬ Output Level L / R 0, 5 Vss **0 ohm ï¬ THD> *0 dB (1 kHz) ï¬ Isolation <**5 dB Digital output ï¬ Output Level 0, 5 Vss *5 ohm ï¬ Sampling digital filter *2 kHz, *4.1 kHz, *8 kHz ï¬ S/PDIF- optical output (AC3) Video parameters: ï¬ Input FBAS 1 Vss + / - 0.3 dB on *5 Ohm ï¬ Teletext filter: ETS **0 **2 standard European Scart plug: ï¬ Output: FBAS, RGB, S-VHS RS**2 interface: ï¬ Bitrate **5, 2 kBit / s maximum. ï¬ Pin SUB-D*9 ï¬ Firmware upgrade Ethernet port ï¬ I firmware upgrade network lNB power and polarisation: ï¬ LNB Current **0mA maximum. Short-circuit protection ï¬ Vertical polarization LNB voltage <*4V without load, > *1.5V (**0mA) ï¬ Horizontal polarization LNB voltage <*0V without load, > *7, 3 V (**0mA) ï¬ LNB power-down standby Receive control ï¬ DiSEqC 1.0/1.2 SAT location / SAT Select ï¬ DiSEqC - motor control ï¬ Power consumption: <*0W / *2V ï¬ Input voltage: DC*2V, AC + / - *5% External power supply: ï¬ Input :******0V AC / ****0Hz / 0, 6 A ï¬ Output: *2V = / 1A Physical Specification: ï¬ Temperature of **5 ° C. .. **5 ° C ï¬ Humidity <*0% ï¬ Dimensions (W x D x H): **5 mm x **0 mm x *0 mm