FOB Price
Obtenir le dernier prix|
Minimum Order
Localité:
-
Prix de commande minimale:
-
Commande minimale:
1
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
1
Payment Type:
-
Personne àcontacter Mr. misha
yinbing, hangzhou, zhejiang
MayaJieli Injection molding machine Extra space between tie bars, extra molding capacity, extra mold plate stroke, extra injection shot weight. Improved type, stable frame structure Effective and sensitive hydraulic system with YUKEN valve and REXROTH oil pump Optical control full-automatic mold adjustment mechanism Combination of fast mold-closing and mold-opening buffer valve block INJECTION CAPACITY : from **0g to ***0g CLAMPING FORCE: from *0T to ***0T MJ-JLQ series A nitrogen accumulator is used. When injecting, the hydraulic oil from both the accumulator and the oil pump is pressed into the injecting cylinder to push the injecting piston, accelerating the piston to complete a fast injection. The MJ-JLQ series machine is suitable for the production of precise thin-walled plastics. which the ordinary machines can not produce. MJ-JLS series A double oil-circuits principle is applied. supplying hydraulic oil to injecting parts and mode-locking parts at the same time via a duplex pump. Thus, the machine clamping open, clamping close and ejecting while pre-injecting, one time but two motions, which shortened the producing cycle. There is only a single oil circuit in those ordinary injection machines. Every motion is sequentially one after another. The cycle is much longer than those of the types with double oil-circuits. The MJ-JLS series machine is suitable for the production of plastics with short cooling time. The shorter the cooling time is, the higher the production efficiency can be. In comparison with the ordinary types, this type of machines can raise the production efficiency by *0~*0%. If it is possible, you can send email to me direct, I use the gmail, and the username is mayajieli , it will be easy for us to communicate.
