Methanol Synthesis Catalyst

Description

RK**3 Methanol Synthesis Catalyst Basis Physics Properties of the Catalyst 1. Chemistry Composition The elements of Catalyst consist of Cu, Zn, Al, O and assistants and so on. 2. Physics Properties Appearance: black cylinder which has metal luster; Size: Ñ„5x(4~5) mm, other size tablets are also available based on customers’ requirement; Accumulation density: 1.5~1.6 Kg/L; Superficial area: *0~**0 m2/g.  Applying Condition of the Catalyst 1. Applying temperature: **0~**0 2. The best temperature range: **0~**0 3. Applying pressure: 3.0MPa~*5.0MPa 4. Applying airspeed: ***0~****0h*1 5. Suitable air component: CO: 2~5%; CO2: 1~4%; H2: *5~*0% Quality Test of the Catalysr Test condition of catalyst activity in the laboratory as follows: The space-time productivity of methanol≥1.0 g/ml.h (or the conversion of CO≥*1%) when we test the sample activity in the above-mentioned condition. Then put the sample in the **0 thermostst for 2 hours, the space-time productivity of methanol ≥0.8g/ml.h (or the conversion of CO≥*0%). The radial anti-crush ability of catalyst ≥**5 N/CM, below *0 N/CM granule ≥7.5%.  Impurity Content Requirement of the Feed Total chlorine (ppm) <0.1 Oxygen content (%) <0.2  The Characteristics of RK**3 Catalyst 1. Catalyst’s structure is steady 2. The impurity content is so low, such as alkali metal, Fe, Ni, and so on; 3. High heat-resistant property, long life-span; 4. High selectivity of the reaction RK**7 Dimethylether Synthesis Catalyst RK**7 is used for the production on Dimethylether from dehydration of Methanol, It has high activity, high selectivity and long life.  Basic Properties Appearance: white cylinder Size: Φ3×(4ï&frac*2;ž8)mm Density: ï&frac*2;ž0.7kg/l  Applying Conditions: Temperature: ******0℃ Pressure: 0.**1.0Mpa Space velocity: 0.**1.2h*1 Methanol: ≥*0%  Catalytic Specification: Conversion of Methanol: ****5% DME content: *9.***9.*9% RK**5 Methanol Synthesis Catalyst  Basic Physics Properties of the Catalyst 1. Chemistry Composition The elements of catalyst consist of Cu, Zn, Al, O and assistants and so on. 2. Physics Property Appearance: black cylinder which has metal luster; Size: Φ5×5mm, Φ6×4mm, We can also provide other size tablets according to consumer’s requirement; Catervatum density: 1.4ï&frac*2;ž1.5kg/l; Superficial area: *0ï&frac*2;ž**0m2/g  Applying Condition of the Catalyst 1. Applying temperature:**0℃ï&frac*2;ž**0℃ 2. The best temperature:**5℃ï&frac*2;ž**0℃ 3. Applying pressure:3.0MPaï&frac*2;ž*5.0MPa 4. Applying airspeed:***0ï&frac*2;ž****0h*1  Quality Test of the Catalyst Test condition of catalyst activity in the laboratory as below: The space-time yield of methanol≥1.3g/ml.h when we test the sample activity in the above-mentioned condition. And then, put the sample in the **0 thermostst for two hours, The space-time yield of methanol ≥1.0g/ml.h when we test the sample activity in the above-mentioned condition. The radial crushing-resisting ability of catalyst≥**5N/CM, below *0 N/CM bead≤7.5ï&frac*4;….  Impurity Content Rule Of the Feed Total chlorine (ppm)<0.1 Oxygen content (%)<0.2 RK*4 Methanol Synthesis Catalyst  Basic Physics Properties of the Catalyst 1. Chemistry Composition The elements of catalyst consist of Cu, Zn, Al, O and assistants and so on. 2. Physics Property Appearance: black cylinder which has metal luster; Size: Φ5×5mm, we can also provide other size tablets according to consumer’s requirement; Catervatum density:1.4ï&frac*2;ž1.5kg/lï&frac*4;› Superficial area:*0ï&frac*2;ž**0m2/g.  Applying Condition of the Catalyst 1. Applying temperature: **0℃ï&frac*2;ž**0℃ 2. The best temperature: **0℃ï&frac*2;ž**0℃ 3. Applying pressure: *0.0MPaï&frac*2;ž*0.0MPa 4. Applying airspeed:***0ï&frac*2;ž****0h*1  Quality Test of the Catalyst Test condition of catalyst activity in the laboratory as below: The space-time productivity of methanol≥1.0g/ml.h (or the conversion of CO≥*1ï&frac*4;…)when we test the sample activity in the above-mentioned condition. And then, put the sample in the **0 thermostst for two hours, The space-time productivity of methanol ≥0.8g/ml.h (or the conversion of CO≥*0%). The radial crushing-resisting ability of catalyst ≥**5N/CM, below *0 N/CM bead ≤7.5%.  Impurity Content Rule Of the Feed Total chlorine (ppm)<0.1 Oxygen content (%)<0.2  The Characteristics of RK**4 Catalyst 1. Catalyst’s structure is steady 2. The impurity content is so low, such as alkali metal, Fe, Ni and so on 3. Heat-resisting function is good, life-span is long 4. Selection property of the reaction is high