100A Electronic Speed Controller for RC Boats (DLB100A) By Shanghai Danlions International Co., Ltd, China
Pas encore membre de TradeKey.com? Inscrivez-vous pour vous connecter avec 9 millions d'importateurs et exportateurs. Rejoignez-le maintenant c'est gratuit |
BOOK A CALL
Book Call On Your Favorite Time
Code
🗘

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

Contact Us
100A Electronic Speed Controller for RC Boats (DLB100A)

100A Electronic Speed Controller for RC Boats (DLB100A)

|

Minimum Order

Localité:

-

Prix de commande minimale:

-

Commande minimale:

-

Packaging Detail:

-

Delivery Time:

-

Supplying Ability:

-

Payment Type:

-

Contacter maintenant
Membre gratuit

Personne à contacter Ms. shirley

5th Floor, Building 10, No.300 Pushan RD, Shanghai, Zhabei District

Contacter maintenant

Description

PULSO ESC (electronic speed controller) for RC Boat(*0A, *0A, *0A, **0A). For Boat Model (DLB series) I. Features: 1. Easy setting; easy operation with waterproof function. 2. It can be connected to USB port of PC by USB cable; it is convenient to set all parameters of ESC. 3. Safe start-up system: The motor wont be started no matter which position the throttle stick is on when the battery is connected. 4. Automatic power cut-off: As the motor stops rotating or the radio signal loses for more than 3 seconds, the power will automatically be cut off. 5. Over-heat protection: The power will be cut-off as it is heated up to **0. 6. No BEC: The receiver needs another electric power supply. (A 5V/3A UBEC can apply the power.) 7. Three frequencies selectable: 8kHz / *6kHz / *2kHz for different series motors. 8. Low-voltage cut-off: By PC via USB cable, the LiIo/LiPo battery single cells cut-off voltage can be set during 2.0V*3.2V (Step: 0.1V); By PC via USB cable, the Ni-MH/Ni-CD battery single cells cut-off voltage can be set during 0.4V*1.0V (Step: 0.1V). 9. Forward / Reverse function. *0. Timing mode: Timing mode 1: **5 degree/ Timing mode 2: ***0 degree/ Timing mode 3: ****8 / Timing mode 4: *0 degree By PC via USB cable, timing mode can be set from ***0 degree(Step: 1 degree) II. Factory Default Setting: 1. Forward / Reverse on mode 2. Timing mode 1 (**5 degree) 3. Cut-off voltage: 5.5V for two cells LiIo/LiPo battery. 4. Frequency 1 (8 kHz).

Send a direct inquiry to this supplier

To:

Ms. shirley < Shanghai Danlions International Co., Ltd >

Je veux savoir: