10/100/1000M Optical Fiber Media Converter

Description

GT-G*3 Series Gigabit Fiber Media Converter can convert Opticalï&frac*4;Electric Ethernet signals between *0/**0/***0M UTP interface (T) and ***0M optical fiber interface (X). The traditional *0/**0/***0M gigabit Ethernet can be extended to the distance of **0km through optical fiber link. The performance and quality of the products are excellent because of adopting latest Gigabit IC from USA. 6 Group LED indicated lights could fully monitor the working conditions of converters. Because of this, it is easy for users to observe and diagnose the failure of converters. GT Series Gigabit Converters could be used individual, or inserted to *4 slots RACK; but Converter Card should be inserted to *6 slots RACK which is suitable for the use of Network Centre. GS*3 single-mode media converter may be used double optical fiber-module or single optical fiber-module which must be used in couples. GT-G**-SFP has two ports, one is the ***0M SFP socket, the other is the UTP port. The SFP socket can be used various ***0M SFP optical fiber-module (***0Base-T, ***0Base-SX, ***0Base-LX) according to the customers’ requirement. Main features â—†Auto negotiation function allows UTP ports to auto *0/**0/***0M and Full Duplex/Half Duplex. â—†The UTP port supports auto MDI-MDIX. â—†Multimode Fiber: the max distance up to **4m/ **0m Singlemode Fiber: the max distance up to **0km â—†Supports the max ***6 byte Ethernet packet â—†Supports flow control â—†Small power consumption, less heat, small size Technical Specifications â—†Operating standards: IEEE**2.3z/AB, ***0Base-T and ***0Base-SX/LX â—†MAC address table: 1K â—†Data Buffer: **2Kb â—†Bandwidth: *2G, can be transmitted to achieve non-blocking wire-speed â—†Connector: UTP: RJ**5, *0/**0/***0Mbps; Fiber: SC/LC ***0Mbps â—†Cable : UTP cable: Cat 5e or Cat 6 (the max distance up to **0m) Fiber : multimode : *0/**5, *2.5/**5Î&frac*4;m (the max distance up to **0/**4m) singlemode : 8/**5, 8.7/**5, 9/**5Î&frac*4;m (the max distance up to **0km) â—†Flow controlï&frac*4;šFull Duplex: IEEE**2.3xï&frac*4;›Half Duplex: back pressure. â—†LEDï&frac*4;šPWR ï&frac*4;ŒFX Link/Actï&frac*4;ŒTP FDXï&frac*4;ŒTP Link/Actï&frac*4;ŒTP **0ï&frac*4;ŒTP ***0 â—†Power: AC **0V(******0V) *0ï&frac*2;ž*0Hz; DC 5Vï&frac*4;Œ2A â—†Ambient temperatureï&frac*4;š0 ï&frac*2;ž **0℃ â—†Storage temperatureï&frac*4;š**0 ï&frac*2;ž **0℃ â—†Humidityï&frac*4;š5% ï&frac*2;ž *0% â—†Dimensionsï&frac*4;š*6 (high) × *0 (width) × *3 (length) mm Order Information Model Product description GT-GM*3 *0/**0/***0M Ethernet Multimode Converter: optical wavelength **0nm, optical fiber max distance up to **4m for *2.5Î&frac*4;m , **0m for *0Î&frac*4;m GT-GS**-xx *0/**0/***0M Ethernet Singlemode Fiber Converter. Optical wavelength ***0 or ***0nm, optical fiber max distance up to *0, *0, *0, *0 or **0km, xx is the amount of distance. GT-GS**-W1/*-xx *0/**0/***0M Ethernet Singlemode Single Fiber Converter, which must be used in couples. Optical wavelength ***0/***0nm or ***0/***0nm, optical fiber max distance up to *0, *0, *0, *0 or *0km, xx is the amount of distance. GT-G**-SFP *0/**0/***0M Ethernet SFP Fiber Converter with one RJ*5 port and one SFP port, can be used various ***0M SFP module according to the customers’ requirement.