FOB Price
Obtenir le dernier prix( Negotiable )
|Minimum Order
Localité:
-
Prix de commande minimale:
-
Commande minimale:
1 Set
Packaging Detail:
Wooden Case
Delivery Time:
-
Supplying Ability:
-
Payment Type:
Western Union, L/C, T/T
Personne àcontacter Ms. Maggie
Hualong road, Jinan, Shandong
1) Equipped with vertical pressure joint die structure. High-speed
hydraulic clamping and slow-speed and low-pressure locking device
to ensure safety of mold to improve efficiency and
productivity.
2) Special hydraulic injection structure with inside pressure
tracing compensation device to ensure fast injection rate and
stable injection pressure. Besides, secondary injection pressure
design to make qualified and precised products.
3) 2 section temperature design to control injection speed, back
pressure and screw speed, which can achieve step-less adjustment.
Suitable for manufacturing various engineering plastic
products.
4) Fixed bottom platen and movable upper platen to ensure position
insertion fixed well. Equipped with ejector device after injecting
finishing.
5) Nitriding steel screw and feed pipe, high torque hydraulic motor
drive and multi section injection pressure to achieve excellent
plastify.
6) Electrical protection device to avoid improper operation and
ensure safety of operator.
7) Feed pipe lifting and falling easily to make cleaning easy and
improve operating efficiency.
| 　 | 　 | Unit | HT**0 | HT**0 | ||
| 　 | 　 | S | DS | S | DS | |
| Injection System | Screw Diameter | mm | *8 | *2 | *5 | *8 |
| Theoretical Injection Volume | cm3 | *5 | *4 | **9 | **3 | |
| Shot Weight | g/Oz | *8/2.0 | *5/2.6 | **5/4.1 | **6/4.8 | |
| Injection Pressure | Kg/cm2 | ***6 | ***7 | ***1 | ***3 | |
| Injection Rate | cm3/s | *0.3 | *2.7 | *9 | *2 | |
| Temperature Control Zone | ZONE | 3 | 3 | |||
| Material Hopper Voulme | L | *5 | *0 | |||
| Clamping System | Clmping Force | ton | *5 | *5 | ||
| Opening Force | ton | 6.6 | 8.3 | |||
| Min Mold Height | mm | **0 | **0 | |||
| Open Stroke | mm | **0 | **0 | |||
| Max Open Distance | mm | **0 | **0 | |||
| Space Between Tie-bar | mm | **0X**0 | **5X**5 | |||
| The biggest Contain Mold Space | mm | **0X**0 | **0X**0 | |||
| Nozzle Stroke | mm | ï¹£ | ï¹£ | |||
| Ejector Stroke | mm | *0 | *0 | |||
| Ejector Force | ton | 1.3 | 1.3 | |||
| Hydrauli Electric System | Hydraulic Pressure | Kg/cm2 | **0 | **0 | ||
| Pump Output | L | **0 | **0 | |||
| Pump Motor Power | KW | 4 | 5.5 | |||
| Heating Power | KW | 2.7 | 4.1 | |||
| Total Wattage | KW | 6.7 | 9.6 | |||
| Other | Slide Platen Size | mm | **0X**0 | **0X**0 | **0X**0 | **0X**0 |
| Slide Platen Stroke | mm | **0 | **0 | |||
| Machine Size | m | 1.8X0.9X2.7 | 2.0X0.9X2.7 | |||
| Machine Weight | ton | 1.*5 | 1.5 | 1.4 | 1.6 | |
