100% Wood materials pure
 wood pellets factory
price Grade A.B varity packagesÂÂ
Biomass MouldingFuel ("BMF" for short) is a new type of clean
fuel that can be directly burned by crushing, mixing,
extruding, drying and other processes of agricultural and
forestry wastes as raw materials to produce various shapes
(such as blocks, granules, etc.)
Wood pellet fuel, as one of the biomass fuels, is a kind of
biomass pellet fuel with high cost performance ratio because of
its special variety. In addition, its common advantages of
biomass pellet fuel make it a popular biomass pellet
fuel
Features:ÂÂ
Pine wood particle fuel generally refers to the particle fuel
with pine wood as raw material. It is different from Scotch
pine particle and miscellaneous wood particle, and it is a
biomass particle between the two. The following figure shows
pine wood pellet fuel
1. The calorific value of pine pellet fuel is 4200-5000
kcal/kg, which is a kind of biomass fuel with high calorific
value among biomass fuels. Therefore, when calorific value is
required, pine pellet fuel has obvious advantages in calorific
value
2. The ash content of pine grain fuel is small, generally 1-3.
Compared with coal combustion, this ash content has little ash
and residue after combustion. The low ash content greatly
improves the utilization rate of pine grain fuel and saves
fuel.
3. Pine wood pellet fuel is highly volatile, easy to burn, and
can also volatilize into combustible gas for full combustion,
which is an advantage that ordinary coal does not
have.
4. There is almost no ash residue after the combustion of pine
wood particle fuel, which is only 1% - 5% of the total weight.
Unlike the large amount of ash residue after the combustion of
coal, which accounts for about 30-40% of the total weight, it
needs to waste human and material resources to clean up the
coal residue, and it is easy to cause secondary pollution to
the environment if it is stacked randomly.
5. The main components of combustible gas after pyrolysis
during the combustion of pine wood particle fuel are H2, CH4,
CmHn, CO, etc. After full combustion, the emission of SO2, CO,
NO, etc. is slight. See the figure below for the specific
emission comparison. Therefore, the combustion emissions of
pine wood particle fuel have a very obvious environmental
protection advantage compared with coal.
6. Pine wood pellet fuel has high utilization rate and unit
price performance price ratio, and is fuel oil. Compared with
gas, electricity and other energy sources, pine wood pellet
fuel is a relatively cost-effective energy, which can generally
save 50% than oil and gas, and 80% than electricity. Compared
with anthracite, it is 10% cheaper and 20-30% more expensive
than low-quality polluting coal. Note that under the conditions
of environmental protection and economy, biomass pine wood
pellet fuel is one of the energy sources with high cost
performance.
7. Pine wood pellet fuel is burned on professional biomass
burners, steam generators and other equipment. Generally,
intelligent operation can effectively control fuel consumption,
and truly achieve scientific control without wasting
energy.
8. Pine wood pellet fuel is an environment-friendly and
renewable energy for resource recovery and reuse. Pine wood
pellet fuel is mainly used as leftover materials from furniture
factories and board factories. It is used for environmental
energy after processing, so pine wood pellet fuel has the
property of environmental protection and renewal.
Package:
15-20kgs/bag ; OEM available
1000KGS/Wood pallet or Plastic bag
Size:6mm or 6-8cm
Lead time:10days after payment receiptÂÂ
ÂÂ
Application:WOOD
PELLETS FOR HOTEL, BATHROOM, HOME USE,BURNERS
,ETC.ÂÂ
 
FAQ :
Q: Can you offer customized
services?
A:Yes, it can be customized and
OEM.
Q: When is your delivery
time?
A:10 to 15 days, depending on the
quantity ordered.If you are looking for a product, we will
give you specific information aboutthe delivery time.If you
need an urgent order,
please contact us to discuss your
specific requirements.
Q:What is the
MOQ?
A:The minimum order quantity
 is usually 10000 KGSÂÂ
Q : What is your payment term ?
A: Our payment term is 30% deposit by T/T, 70% before
shipment by T/T.
ÂÂ
More
Introduction
1-- 100% Tested during production  ÂÂ
2-- 100% Tested before the shipment
3.  100% Responsible for the quality
4 --180 Days Guarantee Time
5--  On time delivery and prompt service guaranteeÂÂ
