The wheel mill achieves the effect of mechanical force
activation through the functions of mechanical mechanics such as
rolling, pressing, squeezing, and rubbing. The structure of the
original mixed material becomes the active material through the
wheel milling, thereby increasing the strength of the product. This
is not possible with other types of mixers. Comparable. It is
suitable for mixing various wet and dry materials and colloids such
as refractory mud, clay, fly ash, slag, tailings slag, molding
sand, etc., and is widely used in refractory materials, ceramics,
building materials, and other industries. The rolling and mixing
effect is very good, the noise is low, the production efficiency is
high, the energy-saving effect is significant, the sealing
performance is good, the environmental pollution is not, and the
adaptability is strong.
The
charcoal powder grinding machine is suitable for mixing various wet
and dry materials, such as refractory mud, clay, fly ash, tailings
slag, slag, etc., and is suitable for coal processing, building
materials, chemicals, ceramics, metallurgy, and other
industries.
Working principle of the
wheel grinder&mixer
This wheel mill is composed of a machine body, a discharge gate, a
transmission mechanism, a wheel mill, an inner scraper, and an
outer scraper. It is fixed on the foundation by anchor bolts; the
uprights are respectively connected with the machine body, and the
inner and outer scrapers of the roller are respectively connected
to the square box of the upright part. The machine is driven by a
motor fixed on the machine body through a V-belt to drive the
gearbox and rotate the wheel-grinding mechanism counterclockwise
through the output shaft. The discharge door is realized by
manually pushing and pulling the rod.
The charcoal powder grinder and mixer is a material crushing
(powder) crushing or mixing equipment composed of a mound and
grinder as main working parts. The wheel mill has a pair of mounds
and a grinding disc, and the material will be crushed by the mounds
on the rotating grinding disc. The outer ring of the grinding pan
has screen holes, and the crushed materials are discharged from the
screen holes.
When processing the carbon powder, add the batch materials and
water into the grinding pan, and after the mixing is uniform, the
material is discharged with the unloader. The carbon powder has
both stirring and squeezing functions during the mixing process,
which can better remove the air between the material particles,
make the mixed material water uniform, and the surface of the
particles is fully wetted.
Tips about the wheel mill
operation
1. Before starting the machine, check whether the transmission and
connection parts are normal, and whether all the fastening parts
are loose, missing, or broken.
2. Check whether the lubrication parts are well lubricated, and
change the lubricating oil as required.
3. Check whether the electrical wiring is damaged and the lighting
is intact.
4. Check whether the tightness of the motor belt is appropriate, so
as not to slip or burn the motor if it is too loose or too
tight.
5. Check whether the discharge door opens flexibly.
6. After the inspection is completed, test the dry operation of the
equipment to observe whether the rolling and scraper rotation is
normal. If there is any abnormality, it needs to be dealt with
before the load can be rotated.
7. When the feeding wheel is grinding, the feed should be
appropriate, so as not to feed too much material and cause the
rotation of the roller to be blocked and damage the equipment.
8. When stopping work or shutting down for troubleshooting, all
power must be cut off.
9. After the work of each shift, residual materials must be removed
inside and outside the equipment.
Technical parameters of the
grinding machine
| Model |
SL-WG1300 |
SL-WG1500 |
SL-WG1800 |
SL-WG2000 |
| Diameter |
1300mm |
1500mm |
1800mm |
2000mm |
| Power |
5.5kw |
7.5kw |
11kw |
18.5kw |
| Capacity |
300kg/h |
500-800kg/h |
1000-2000kg/h |
2000-3000kg/h |
Â
