Prix FOB
Obtenir le dernier prix|
- Minimum Order
Pays:
China
N ° de modèle:
Tungsten Alloy for Oil Logging
Prix FOB:
Localité:
-
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
-
Heure de livraison:
-
Capacité de Fournir:
-
Payment Type:
-
Groupe de produits :
-
Personne àcontacter KJ
Economic Development Zone, Lukou, Zhuzhou, Hunan
Usually, when it comes to environmental or geotechnical studies
about groundwater, mineral, oil and gas
exploitation, it is necessary to well logging for
analyzing stratum situation exactly when drilling boreholes.
Well logging is performed at various intervals during the drilling
of the well and when the total depth is drilled, which could range
in depths from **0 m to ***0 m (***0 ft to *5,**0 ft) or more.
WHA appliance for oil well logging
Since well logging always needs entering the earth
as deeper as possible to get the characterization of wells,
high-performance logging facility is required, and it should
be heavy and firmer enough, so as to balance out much more upward
resistance and enhance the downward impulse force. In fact, it
should just work as counterweight for the whole part.
Tungsten heavy alloy (WHA) is an excellent casing
material for down-hole logging of oil wells. Casings must be
sufficiently heavy to readily sink through materials such as barite
mud and strong enough to withstand the hydrostatic pressure of this
harsh environment. Most designs are highly machined for sensor and
window positioning. Mechanical properties are very significant to
the survivability of these rather large components.
Owning to high density as *8.5g/cm3 max, hardness as *6 HRC max,
high wear-resistance, high impact resistance and excellent
durability, tungsten heavy alloy (WHA) is quite
suitable material for down-hole logging of underground water, oil
and gas, etc. Special mechanical property is overweight large
component in this case.
Tungsten heavy alloy related to petroleum industry we can
offer
We can offer various tungsten heavy alloy products as counterweight
for logging tools, also we would like to design the drawing or
manufacture concrete products according to customer’s special
requirements. The products we offered are in pressed & sintered
blanks large enough to yield the desired component or machined
components to customer’s specifications
| Pays: | China |
| N ° de modèle: | Tungsten Alloy for Oil Logging |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | - |
| Commande minimale: | - |
| Packaging Detail: | - |
| Heure de livraison: | - |
| Capacité de Fournir: | - |
| Payment Type: | - |
| Groupe de produits : | - |
