Prix FOB
Obtenir le dernier prix9 ~ 10 / Bag
|40 Bag Minimum Order
Pays:
China
N ° de modèle:
M520
Prix FOB:
9 ~ 10 / Bag Obtenir le dernier prix
Localité:
China
Prix de commande minimale:
9 per Bag
Commande minimale:
40 Bag
Packaging Detail:
Selfpacking
Heure de livraison:
15days
Capacité de Fournir:
10000 Bag per Day
Payment Type:
T/T, L/C, Western Union, Money Gram, PayPal
Groupe de produits :
Personne àcontacter Ms. Jenna
husong road, Shanghai, Shanghai
M418 Thick Self-leveling
Product
Introduction:
Environmental protection products refined from high strength
gypsum, fine aggregate and other additives and other raw
materials, good mobility can quickly level the ground, moisture
content of the base must be moisture-proof treatment before
self-leveling construction, a single construction thickness of
2mm-30mm, completely dry solid can achieve smooth, solid ideal
effect, PVC plastic flooring, wood flooring, carpet, lock floor
and other ground materials can be laid. The floor paving should
be waterproof and moisture-proof around the floor and the
joint.
Â
Features:
Primary construction thickness of 2mm-30mm;
High fluidity, low shrinkage, excellent crack
resistance;
Low alkali formula, smooth and wear-resisting.
Â
Application Places:
Suitable for home, office, hotel, school, hospital, small
exhibition hall, light industrial floor and other ground projects
leveling, very suitable for leveling on the underfloor
heating.
Surface Treatment:
The base must be dry, solid, dust-free, pollution-free debris; In
order to ensure good adhesion, the base is sealed with MSYH
primer. M318 water-based primer is recommended for absorbent base
and M320 non-absorbent primer is recommended for non-absorbent
base.
Â
Application:
1. After the original base is cleaned, appropriate MSYH primer
should be selected and applied to the surface. After the primer
has been absorbed by the original base and dried and solidified,
start applying the self-leveling.
2. Pour 6-6.5L of water into the mixing container, then slowly
add a pack of self-leveling. Blend with blender for 3-5 minutes
and no clumps. Pour out the mixture, spread evenly and spread
evenly with spatula or special toothed scraper until desired
thickness, or the transmission capacity of 20-40 KL/min pump
slurry to the required thickness.
3. The mixture shall be applied within 20 minutes. The freshly
constructed slurry shall avoid direct sunlight and strong
wind.
4. Before the initial setting of the product, the air brought in
during mixing should be eliminated. It is recommended to conduct
defoaming to ensure the smooth surface.
Reference
Consumption:
Product consumption is about 3.2kg/m2•2mm or 16kg/m2•10mm. The
actual amount depends on the construction thickness and actual
conditions of the surface.
Notes:
1. This product is not suitable for outdoor or humid
environment;
2. After the completion of construction, the ground material
shall be laid in time to avoid the surface strength decline or
cracking of the leveling layer caused by long-term exposure to
the air;
3. The product can not be soaked in water after it is completely
hardened.
Packaging and
storage:
25kg/bag. This product must be stored indoors, pay attention to
moisture-proof, waterproof, rainproof and prevent insolating.
Pallets should be stacked in no more than 8 layers. Shelf life is
6 months.
| Pays: | China |
| N ° de modèle: | M520 |
| Prix FOB: | 9 ~ 10 / Bag Obtenir le dernier prix |
| Localité: | China |
| Prix de commande minimale: | 9 per Bag |
| Commande minimale: | 40 Bag |
| Packaging Detail: | Selfpacking |
| Heure de livraison: | 15days |
| Capacité de Fournir: | 10000 Bag per Day |
| Payment Type: | T/T, L/C, Western Union, Money Gram, PayPal |
| Groupe de produits : | PVC Floor Accessories |
