Prix FOB
Obtenir le dernier prix( Negotiable )
|1 Set Minimum Order
Pays:
China
N ° de modèle:
crane
Prix FOB:
( Negotiable )Obtenir le dernier prix
Localité:
China
Prix de commande minimale:
-
Commande minimale:
1 Set
Packaging Detail:
box
Heure de livraison:
15-20days
Capacité de Fournir:
2000 Set per Month
Payment Type:
T/T
Groupe de produits :
Overhead cranes are suitable for loading and unloading of pieces,
sundries and bulk cargo at small and medium-sized docks, warehouses
and stacks in inland ports. This model is a single-arm truss type,
with wire rope or single rack luffing, and adopts compound pulley
compensation. The cargo can be horizontally displaced, with full
load luffing, ***-degree full rotation, stable and reliable
operation, high operating efficiency, safe and effective use.
Overhead cranes are mainly suitable for loading and unloading of
pieces, sundries or bulk cargo at small and medium-sized docks,
warehouses, stacks or factory areas in inland ports.
Equipment maintenance:
(1) For the damaged parts of the paint film on the metal structure,
the surface of the component should be cleaned and coated with
anti-rust paint and decorative paint film to protect the metal
surface from rust after rain and snow.
(2) Anti-rust work should be done carefully on the movable parts of
the crane, such as the connecting pins between the sling and the
crane, the guide wheels, and the wheels of the trolley. After
stopping the machine, you can first clean these parts with a brush
to remove impurities, moisture, rust spots, etc. that may cause
rust, and then use **0 or **0 diesel on these parts. Because **0 or
**0 diesel has stronger permeability than engine oil, the loaded
hinged parts can penetrate into it, forming an oil film on the
metal surface. Because of its low freezing point, it can resist low
temperatures.
(3) After cleaning and lubricating with diesel, apply a layer of
grease. Calcium-based or lithium-based grease is a good choice,
because these two greases have good mechanical stability, adhesion
and water resistance, and the freezing point can reach **0 degrees.
When applying grease, the coating should not be too thick.
Rust prevention of dock cranes is a key task and cannot be sloppy.
Therefore, maintenance and anti-rust work of dock cranes must be
done regularly to be effective.
Pays: | China |
N ° de modèle: | crane |
Prix FOB: | ( Negotiable ) Obtenir le dernier prix |
Localité: | China |
Prix de commande minimale: | - |
Commande minimale: | 1 Set |
Packaging Detail: | box |
Heure de livraison: | 15-20days |
Capacité de Fournir: | 2000 Set per Month |
Payment Type: | T/T |
Groupe de produits : | Loader |