Heavy Duty Drawer Rack L888D800H2000mm (MR-001-UI) for Storing Moulds or Tools Storage

Prix FOB

Obtenir le dernier prix

0.9 ~ 1.4 USD / Kilogram ( Negotiable )

5 Set Minimum Order

Pays:

China

N Â° de modÃ¨le:

Prix FOB:

0.9 ~ 1.4 USD / Kilogram ( Negotiable )(Negotiable) Obtenir le dernier prix

LocalitÃ©:

Prix de commande minimale:

0.9 per Kilogram

Commande minimale:

5 Set

Packaging Detail:

standard export package

Heure de livraison:

15-20days

Capacité de Fournir:

200 per Month

Payment Type:

L/C, T/T

Groupe de produits :

Mold Rack

Contacter maintenant

Jiangsu Unisource Industrial Co., Ltd.

China

1333 Points de confiance

Personne Ã contacter Zhu

Nanjing, Jiangsu

Contacter maintenant

Surface treatment:powder coating
Color:Blue, Orange, Yellow, Green or RAL color

La description

Heavy Duty Drawer Rack L**8*D**0*H***0mm (MR****-UI) for Storing Moulds or Tools Storage

Drawer mold rack is mainly used for storage of all kinds ofmold, which could be assembled with manual movable carriage on the top so as to easily take and retrieve the goods. The side rack was equipped with idler wheel rail on the bottom and the sliding shelf panel could be freely pulled out when loading. The middle type slide rack could carry less than **0KG/Layer, The entire drawer mold rack is section combination structure, which is convenient for transport, and the assembly is simple and fast and this rack possesses better safety protection device. Special drawer type mold rack can be ordered.

Quick Specification

Item number	Drawer mold rack, Slide rack, Tooling rack
Material	Q**5 cold rolledsteel
shelf	Draw-able, can be half open or widely open
Standard size	L*8D60H***0mm can customized any size
Level & Loading Capacity	4 levels + top levelThe top level is fixed and its loading capacity is equal to or bigger than0kg.The lowerfour levels can be drawn out0mm and can load as much as8*0kg.
Drawer mold rack using	Injection molds and dies storage
Surface treatment	Powder coated
color	Green or as your like
upright post	00MM square tube, #*0 channel steel
upright post spacer	2.0MM cold roll steel
Drawer material	2.0MM cold roll steel
accessoires	overhead travelling crane and chain block

Note:The lowerfour levels can only be drawn out one by one.(when first level is drawn out. The second and third level can not be drawn out. Automatic safety interlock system for only one shelf extending at a time comes standard.

Advantages:Slide rack is widely used in work plants of machinery industries. To work with crane will enhance the work efficiency. For tools are often very heavy and small in size, so the draw-out design makes tools easier be taken out. So it makes access work convenient.

Deatails:

Mould rack is composed of uprigt frame, steel decing, support structure, self locking devices etc,

The support structure is the secondary design, the loading capacity of the single drawer is generally within ***0KG.

The drawer deking can be designed to the semi-open.It is suitable for storing moulds etc, the crane, forklift, self-made trolley can be used for picking up goods.The particular slideway design makes the small using resistance, and the self-locking device can be reliabl, and safe.,Each drawer can be drawn out *0% of its depth.

Features:

1.More mouldules can be added by being bolted together;

2.Easy operation: Roll-out shelving provides easy and safe access to injection molds and dies. Shelves are adjustable on *0mm centers to adjust your inventory of molds.;

3.Save space and cover less area, 3*4 standards shelf can be deposited with dozens dies;

4.Simple structure: composed by a variety of components, easy for transport and assembly;

5.Reinforced rack tops provide an economical way to store your heaviest tools with rack top capacities up 4 tons or more;

6.Three uprights frame structure ensure **0% shelf extension;

Our Services

Our Promise as below: ( ^_^ )

1. Material is steel Q**5, high-quality steel from Shanghai Bao Steel Corporation , the top 5 steel manufacturer in China;

2. Samples could be supplied for you in ***5 days;

3. Products could be customized as your request;

4. Warranty is2 years if not artificial reasons!

5. Matters not mentioned herein could be discussed!

Guarantee ofJiangsu Unisource Industrial Co., Ltd.:
3~*0 years warranty in case that
A) Proper handling during operation, correctly forklift handling while stacking/un-stacking
B) Overloading is prohibited
C) Environment request indoor, dry and not humid circumstance, do not contact with any corrosive chemical material (for zinc plated and powder coated products, no limitation for hot dip galvanized)
D)We will take full responsibility for any manufacturing defect is identified after arrival, would either refund or reship good products to you.

Kindly inform us the info. as below:
- Drawing (if available) of rack; if not, we can offer CAD design service for you
- Size of your warehouse (Length x Width x Clear height)
- Storage requirement on the cargo(temperature etc)
- Size (W*D*H) & weight of pallet (after loading)
- How many pallets each layer you would like
- How many layers you would like
-Parameter of your forklift ( to decide the width of aisle between racking).
-The color you want

Contact:
Jasmine (I'm a lovely girl !)
Tel: (**6) *5 6******0
Fax:(**6) *5 *******3
Phone:(**6) **********1
Skype:Jasmine_racking
Mail:jasmine (at)unisource-cn (dot) com
Our company is flexible and we can adapt to your design.
Please feel free to contact me for storage equipment any time.
We can quote you upon request, and will reply you within *4 hrs.

Pays:	China
N Â° de modÃ¨le:	-
Prix FOB:	0.9 ~ 1.4 / Kilogram ( Negotiable ) (Negotiable) Obtenir le dernier prix
LocalitÃ©:	-
Prix de commande minimale:	0.9 per Kilogram
Commande minimale:	5 Set
Packaging Detail:	standard export package
Heure de livraison:	15-20days
Capacité de Fournir:	200 per Month
Payment Type:	L/C, T/T
Groupe de produits :	Mold Rack

Heavy Duty Drawer Rack L888*D800*H2000mm (MR-001-UI) for Storing Moulds or Tools Storage

Medium Duty Warehouse Rack - Unisource Storage

US$ 0.8~ 1 / Kilogram

Heavy Duty Drawer Rack L888D800H2000mm (MR-001-UI) for Storing Moulds or Tools Storage

Jiangsu Unisource Industrial Co., Ltd.

SpÃ©cification du produit

La description

Mots-clÃ©s correspondants Jiangsu Unisource Industrial Co., Ltd.

Send a direct inquiry to this supplier

To:

Je veux savoir:

Heavy Duty Drawer Rack L888*D800*H2000mm (MR-001-UI) for Storing Moulds or Tools Storage

Jiangsu Unisource Industrial Co., Ltd.

SpÃ©cification du produit

La description

Mots-clÃ©s correspondants Jiangsu Unisource Industrial Co., Ltd.

Mots-clÃ©s correspondants

Medium Duty Warehouse Rack

Send a direct inquiry to this supplier

To:

Je veux savoir:

Get Verified Buyers & Suppliers

Avail Free Consultation

Heavy Duty Drawer Rack L888D800H2000mm (MR-001-UI) for Storing Moulds or Tools Storage