La description
The production line of Prss-Casting HDPE fittings machine
  The press-casting(PC) HDPE fittings technology is
invented by us based on our many years' experience in the HDPE
fitting production. This is the best solution to produce big
diameter HDPE pipe fittings. It is new technology combined with
extrusion, injection, hot runner forming technology.
  Compare the injection molding technology, this
technology is of low investment, high production low power
consumption.
  For example, to make the complete **0mm flange(SDR*1,
ISO ***7), the injection molding machine is ****0grams.
  ITEM      INVESTMENT
   MOULDS      Â
OUTPUT Â Â Â Â Â Â POWER CON
 INJECTION    ABOUT*****0USD
   ****0USD    *4 PCS/*4H
   1
 PC      Â
ABOUT*****0USDÂ Â Â Â ****0USD Â Â Â
****0PCS/*4H Â Â Â 1/**2/3
 Note: the moulds price is without hot runner system, if with
hot runner, the price will be about 1.2 to 1.5 times.
 If the injection moulds is without hot runner, there will be
many fish eyes in the fitting due to the material crystallization
after cooling, the inner tension is high, and production quality
cannot be controlled. If the mould is with hot runner, the cost of
the moulds is very high and maintenance and operation is
difficult.
 Considering the above issue, we develop the new
press-casting (PC) to produce the big diameter HDPE fitting. PC
technology is combined with extrusion, injection, hot runner and
accumulation cylinder technology. It can make the HDPE fittings
with the diameter less than ***0mm, such as flange, cap, socket,
reduced socket, and less than **0mm fittings, such as TEE, elbow,
saddle, etc
 The machine consists follow unit
1. Extruder
2. accumulation cylinder, capacity
3. Four pole hydraulic pressing machine
4. Hot runner control system
5. Control system
6. Simple lather machine, to finish the surface
 We select the standard four pole hydraulic pressing machine
as the forming base with our modification. To adopt the
accumulation cylinder supply the melt material during the
production after extruder stop to ensure enough material for
production. The moulds is with hot runner system. The moulds
structure is simple due to the hydraulic machine take most of
moving function. So the moulds cost is low and service life is
long.
| Pays: |
China |
| N ° de modèle: |
1600
|
| Prix FOB: |
(Negotiable)
Obtenir le dernier prix
|
| Localité: |
- |
| Prix de commande minimale: |
- |
| Commande minimale: |
- |
| Packaging Detail: |
- |
| Heure de livraison: |
- |
| Capacité de Fournir: |
- |
| Payment Type: |
- |
| Groupe de produits : |
- |
