Prix FOB
Obtenir le dernier prix3000 ~ 15000 USD / Piece ( Negotiable )
|1 Piece Minimum Order
Pays:
China
N ° de modèle:
30000 air volume
Prix FOB:
3000 ~ 15000 USD / Piece ( Negotiable ) Obtenir le dernier prix
Localité:
Botou City, Hebei Province, China
Prix de commande minimale:
3000 per Piece
Commande minimale:
1 Piece
Packaging Detail:
Determine based on customer requirements
Heure de livraison:
10 to 25 days
Capacité de Fournir:
10000 Piece per Year
Payment Type:
PayPal, Money Gram, Western Union, D/P, D/A, L/C, T/T
Groupe de produits :
Personne àcontacter Yueqiang
Xihuan Street, Botou City, cangzhou, hebei province,China
Introduction: A wind dust collector is a dust removal device. The mechanism of dust removal is to rotate the dusty airflow, use centrifugal force to separate and capture the dust particles in the airflow, and then use gravity to make the dust particles fall into the ash hopper. Cyclone dust collectors began to be used in ***5 and have developed into various types. According to their inflow modes, they can be divided into two categories: tangential inflow and axial inflow. Under the same pressure loss, the latter can handle approximately three times more gas than the former, and the airflow distribution is uniform. The structure of a conventional cyclone dust collector consists of an intake pipe π, an exhaust pipe π, a cylinder π, a cone, and an ash hopper. The cyclone dust collector has a simple structure, is easy to manufacture, install, and maintain, and has low equipment investment and operating costs. It has been widely used to separate solid and liquid particles from airflow, or to separate solid particles from liquids. Under normal operating conditions, the centrifugal force acting on particles is *****0 times that of gravity, so the efficiency of cyclone dust collectors is significantly higher than that of gravity settling chambers. Among mechanical dust collectors, cyclone dust collectors have the highest efficiency. Suitable for removing non sticky and non fibrous dust, mostly used for removing 5 μ Particles above m, parallel multi tube cyclone dust removal
| Pays: | China |
| N ° de modèle: | 30000 air volume |
| Prix FOB: | 3000 ~ 15000 / Piece ( Negotiable ) Obtenir le dernier prix |
| Localité: | Botou City, Hebei Province, China |
| Prix de commande minimale: | 3000 per Piece |
| Commande minimale: | 1 Piece |
| Packaging Detail: | Determine based on customer requirements |
| Heure de livraison: | 10 to 25 days |
| Capacité de Fournir: | 10000 Piece per Year |
| Payment Type: | PayPal, Money Gram, Western Union, D/P, D/A, L/C, T/T |
| Groupe de produits : | Cyclone dust collector |
