Addition Molding Silicone for life casting copied

Prix FOB

Obtenir le dernier prix

6.23 ~ 7.5 USD / Kiloampere

200 Kilogram Minimum Order

Pays:

China

N Â° de modÃ¨le:

HY630

Prix FOB:

6.23 ~ 7.5 USD / Kiloampere (Negotiable) Obtenir le dernier prix

LocalitÃ©:

Prix de commande minimale:

6.23 per Kiloampere

Commande minimale:

200 Kilogram

Packaging Detail:

Packed in clean 20kg/pail+20kg/pail, 200kg/pail+200kg/pail

Heure de livraison:

3days

Capacité de Fournir:

8 Ton per Day

Payment Type:

Western Union, L/C, T/T

Groupe de produits :

Contacter maintenant

Shenzhen Hong Ye silicone rubber Co., Ltd

China

Membre gratuit

Personne Ã contacter Ms. Judy

buildingA,NO.3,hongling first road,liulian shibi, pingdi street,long gang district,shenzhen,chiana, Shenzhen, Guangdong

Contacter maintenant

SpÃ©cification du produit

liquid:white

La description

Hongye HY-E**2 Addition Molding Silicone for life casting copied

HY-E**2 Addition Molding Silicone for gypsum casting copied Applications,

HY- E**2# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting, candle molding,for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.

HY-E**2 Addition Molding Silicone for gypsum casting copied Description

HY- E**2# addition molding silicone is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds application.

Technique Data of HY-E**2 Addition Molding Silicone for gypsum casting copied:

Model	HY-E2#**
Appearance	Translucent
Mixing Ratio	1:1
*Operating time (Mins 5°C)**	0 - 0
*Curing time (Mins 5°C)**	0 - 0
*Curing time (Mins 0°C)**	0 - 0
Hardness (A°)	*2±2
Density ( g/cm 3 )	*1.8**
Viscosity (CS) (Part A)	**0 ± *0
Viscosity (CS) (Part B)	*0 ± 0
Viscosity (CS) (After mixed)	**0 ± *0
Tensile-strength( kgf /cm2 )	*0 ± 0
Tear-strength (kgf /cm2 )	*5 ± 2
Elongation-break(%)	*0 ± 0
Retractility(%)	≤0.1

OPERRATING INSTRUCTION of HY-E**2# molding silicone:

1. Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4. Pour the mixture with correct mixing ratio into the model frame.

After about **4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .

HY-E**2 Addition Molding Silicone for gypsum casting copied SHELF LIFE:

Twelve (*2) months from date of shipment when stored at *4°C in original unopened packages.

Contations on HY-E**2 Addition Molding Silicone for gypsum casting copied:

Any more information , please fell free to contact with Miss Judy

Mobile: **6**89****6****1 Tel: **6***5****4**0*3 Fax: **6***5****4****0 E*mail: hyja(at)szrl(dot)net **********1(at)qq.com MSN: hyjjudy(at)hotmail(dot)com SKYPE: judy.zhao**3 Website: ww*w(dot)szrl(dot)net

Y-E**2 Addition Molding Silicone for gypsum casting copied

Pays:	China
N Â° de modÃ¨le:	HY630
Prix FOB:	6.23 ~ 7.5 / Kiloampere (Negotiable) Obtenir le dernier prix
LocalitÃ©:	-
Prix de commande minimale:	6.23 per Kiloampere
Commande minimale:	200 Kilogram
Packaging Detail:	Packed in clean 20kg/pail+20kg/pail, 200kg/pail+200kg/pail
Heure de livraison:	3days
Capacité de Fournir:	8 Ton per Day
Payment Type:	Western Union, L/C, T/T
Groupe de produits :	-