Prix FOB
Obtenir le dernier prix25.85 ~ 34.46 USD /
|5 Minimum Order
Pays:
China
N ° de modèle:
42
Prix FOB:
25.85 ~ 34.46 USD / Obtenir le dernier prix
Localité:
China
Prix de commande minimale:
25.85
Commande minimale:
5
Packaging Detail:
box
Heure de livraison:
3-7 day
Capacité de Fournir:
5000000 Piece per Month
Payment Type:
PayPal, Money Gram, Western Union, D/P, D/A, L/C, T/T
Groupe de produits :
-
Personne àcontacter Ms. Bella
Building B1,Hongxintai Industrial Park Yinying Road, Dalang Town,, Dongguan, Guangdong
Â
Motor
parameters:
Product
Name: *2 two-phase stepper motor
Model
number :*7HS***1
Step angle
: 1.8 °
Maximum
no-load starting frequency : ≥ ***0
PPS
Rated
voltage 3.6V
Maximum
no-load operating frequency : ≥ ***0
PPS
Rated
current : 1.5A / phase
Phase
inductance :3.7 × (1 + *0%) mH
Holding
torque : ≥**0 mN.m
Phase
resistance : 2.4 × (1 + *5%) Ω /
phase
Positioning torque : *5 mN.m
REF
Electric
strength : AC**0V / 1mA / 1S
Â
Wiring
Instructions:
1. VCC :
Connect ****0V power supply ( Refer to the working voltage of the
motor, general *4V )
2. GND: Ground
wire
3. CLK :
Control signal (Connected to pulse
 )
4. DIR: Direction control signal
(Â Floating forward, ground
reverse )
5. ENA: Connect to enable signal
(Â Default enable, grounding stops
working )
6. P2:
Connect one phase to the motor on each side (Â Refer to the
motor parameter description, Â Â the motor is divided into
two phases AB, pins 1 and 2 are connected to one phase, and pins 3
and 4 are connected to the other
phase. )
Â
DIP switch
{ON (1) / OFF (0)}:
1.Div1,
Div2 control pulse frequency
division
    Â
 (1) *0: 4  subdivision
Â
    (2) *0: 8
 subdivision
Â
    (3) *1:*6
 subdivision
Â
    (4) *1:*2
 subdivision
2.Ctl
setting control mode, open-loop /
closed-loop
    Â
(1) 0 :
 Open-loop mode
Â
    (2) 1 :  Closed-loop
mode
3.AC
setting calibration
   Turn
the AC to position 1, and turn on the power. The LED blinks 3 times
to start automatic calibration. The motor shaft rotates
counterclockwise for one cycle and then clockwise for one cycle.
The system automatic calibration complete and the LED continues to
flash. The AC dial returns to position 0, and then restart
power.
Â
Application
examples:
1. 3D
printing with fine closed-loop
positioning
Â
| Pays: | China |
| N ° de modèle: | 42 |
| Prix FOB: | 25.85 ~ 34.46 / Obtenir le dernier prix |
| Localité: | China |
| Prix de commande minimale: | 25.85 |
| Commande minimale: | 5 |
| Packaging Detail: | box |
| Heure de livraison: | 3-7 day |
| Capacité de Fournir: | 5000000 Piece per Month |
| Payment Type: | PayPal, Money Gram, Western Union, D/P, D/A, L/C, T/T |
| Groupe de produits : | - |
