La description

 

Steel Strip pickling line

Strip the pickling process is through the chemical methods to remove rolling process and in the strip surface after rolling of the formation of the oxide skin or oxide. At present, is widely accepted push-pull type turbulence hydrochloric acid, hydrochloric acid pickling wash with as a medium. Advanced pickling line generally use shallow groove pickling, this kind of means can save with acid consumption but also to better pickling effect, and the underside pickling strip than ShenCao pickling effect is good. My company can contract pickling line of all the equipment design, manufacture, installation and debugging.

1. Continuous type pickling general used for more than *****0 tons of steel strip annual pickling line, due to the need for configuration welding machine, large live set, and stretching straightener, so its features are: pickling high speed and high output, investment;

2. Push-pull type pickling general for annual output of *****0 tons of steel strip below pickling line, because the equipment configuration, so without its features are: small investment, quick effect, but its production speed and yield no successive high. And it can deal with the range of products to more than successive production line, high flexibility, cost is low, and convenient operation of the production line.

With annual output of *****0 tons of push type pickling line as an example

Production *****0 tons/year strip thickness 1.5 ~ 4.5 mm

**0 m/min maximum linear velocity strip width **0 ~ ***0 mm

Wear take speed *0 ~ *0 m/min raw materialφ**0 mm diameter

Material kinds, sheet (SPCC SPCD, ALφ**0 mm diameter SPCE products

The yield strength of **0 ~ **0 N/steel coil diameter was the Max.φ***0 mm

Tensile strength of **0 ~ **0 N/steel coil was the single heavy Max. *5 t