La description
    1Ka Steel -
Hair Restructurizer Treatment
Kit
Hair Teatment based on glyoxylic acid, mix of
ten amino acids and essential oils.
1Ka Steel does not use formaldehyde or any of
its derivatives.
It has a unique and revolutionary technology
that treats and rejuvenates the hair while providing a natural
straightening.
Using 1Ka Steel colouring or bleaching are made
right after treatment with no risk of losing the straightening
process or interfere with the result.
1Ka Steel is compatible with any chemical
treatment made previously, such as colouring, bleaching, Keratin,
Guanidine, Ammonia, Lithium and Sodium.
Kit Content:
1 x Thermo Acrylic Active 1 Liter
1 x Pre Tratamento Shampoo 1 Liter
1 x Natural Mask **0g
Step
By Step Instructions
*- Wash with deep cleaning shampoo (clarifying
shampoo) 3 times, massaging well and wait 5 minutes in the last
shampoo. Rinse completely.
*- Dry **0%.
*- Apply 1Ka Steel.
*- Use 2 overlapping plastic caps to keep the
heat of the head.
*- Pause for hair
de-structuring.
a- Wash the hair 3 times with warm water using
Shampoo 1Ka Pre Treatment and, on last shampoo, pause 5 to *0
minutes with shampoo in hair. This way the hair cuticle will be
wide open.
b- Rinse well removing all
shampoo.
c- Dry **0% with a hair dryer. It is very
important to remove all water that penetrated into the hair
because 1Ka Steel will penetrate in the hair and cannot do it if
water occupy place in hair.
d- In a recipient, dispense approximately
****0ml of 1Ka Steel. If necessary, add some more later. The
remaining product cannot be returned to the bottle because its
contaminated. Apply 1Ka Steel using gloves and a paintbrush,
without touching the scalp. Spread 1Ka Steel, in small portions,
starting at the nape and from root to the middle and tip. For
virgin hair apply throughout the hair and cover with 2 plastic
caps. For hair that received any previous treatment, but has
virgin roots, apply first to the virgin roots, cover with 2
plastic caps, wait *0 minutes then spread to the rest of the
hair. It is a lot easier to implement and this way the
de-structuring process occurs simultaneously all along the hair.
The caps are to keep head natural temperature (*7°F = *6°C) and
accelerate the de-structuring process.
e- Check if the hair is already unstructured
doing the knot test. The complete hair de-structuring is decisive
for the final result.
1Ka Steel can be left much longer after the
de-structuring but not to take out before.
f- After the hair is unstructured, dry it **0%
with a hair dryer and, with a thick comb or brush, carefully let
the hair in line from the root to the tip. Letting it in line
allows the flatiron-straightener to reach closer to the root
without touching the scalp.
Â
Tips for Better Results
*- Perform the knot test. Do a knot with about
*0 hairs (the nape area, near the root, is where it takes more
time).
If the knot untied by itself, leave 1Ka Steel a
little more. If the knot remains tied, the hair is already
unstructured.
IMPORTANT:ALL
HAIR MUST BE UNSTRUCTURED BEFORE GO TO NEXT
STEP.
If you are not **0% sure that all the hair is
unstructured, then wait a little longer. Only if the hair is
unstructured go to next step.
*- Rinse removing **0% of 1Ka
Steel.
*- Drain excess water with hands and over the
wet hair apply the mask, distributing thoroughly and well
massaging the hair.
*- Pause ***0 minutes (do not let more than *5
minutes).
**- Rinse removing **0% of mask. Dry with a
hair dryer.
**- Use a fl at-iron-straightener, pass 8
to
*5 times, slowly, in small batches of hair,
giving traction during ironing, hair will remember how you are
letting it now. When sealed the hair will show a healthy
brightness.
Hair Type Approx. Temp.
Medium or fi ne hair (virgin) **0°C to **0°C
(**4°F to **8°F)
Bleached, dyeing or **0°C to
**0°C
Sensitized hair due (**6°F to
**0°F)
Chemical process
Thick, Frizzy, **0°C to **0°C
Resistant (virgin hair) (**0°F to
**6°F)
Important:
Always start at a high temperature and decrease if there is
colour change.
**- Process finished. Style as you
desire.
g- For virgin hair (or also for any hair to be
dyed later) apply the flat-iron-straightener with 1Ka Steel still
in hair. This will cause a lot of smoke, but will leave hair
smoother and better treated.
h- For coloured hair that will be not dyed
after, rinse *0% or more of 1Ka Steel and dry the hair before
ironing. This will prevent colour changes
occur.
i- The ironing process is decisive for the
treatment result. Use a good quality flat iron- straightener and
apply it 8 to *5 times, slowly, in small portions, keeping a good
stretching with comb to apply the iron. The hair will remember
the form that is being given now.
Note: If the hair colour changes reduce the
iron temperature.
j- Let the hair cool down to room temperature,
rinse well with plenty of water removing the entire 1Ka Steel
from the hair.
k- Remove the humidity excess with hands or a
towel and, over the wet hair, apply 1Ka Natural Mask, leave it
for *0 minutes. Rinse and dry. This will let hair to return to
its normal pH. The process ends here.
l- Finalize by styling as you desire, even
apply colour or any other treatment.
Total Time of 2 hours or
less.
Hair Type Approx. Pause (in
Minutes)
Medium or fi ne hair (virgin) *0 to
*0
Bleached, dyeing or sensitized hair *0 to *0
due chemical process
Thick, Frizzy, resistant (virgin hair) *0 to
*0
Important:You
can pause longer after the unstructured process, but not
less
Delivery:
Product Original From
Brazil!!!
Product will be Shipped From
Brazil
Parcel estimate time within 8Â to
*6Â business days, depending on destination custom clearance
process.
If, for some reason you didn't get it on
time, please contact us, so we can find out the issue that might
have occurred.
For any further questions, please don't
hesitate to contact us. Our on-line support team will be more than
happy to assist you in any issue or question, and we are
committed to provide the best service.
As it is noted in our selling terms and
conditions, we are not responsible for any local charges (Import
tax, VAT, etc.) that might apply for the order per your country's
customs regulations.
| Pays: |
Brazil |
| N ° de modèle: |
-
|
| Prix FOB: |
229 / Set (Negotiable)
Obtenir le dernier prix
|
| Localité: |
- |
| Prix de commande minimale: |
229 per Set |
| Commande minimale: |
1 Set |
| Packaging Detail: |
Sealed Corrugated Strong Box |
| Heure de livraison: |
15-26 days |
| Capacité de Fournir: |
2500 Liter per Week |
| Payment Type: |
PayPal, Western Union, T/T |
| Groupe de produits : |
Cosmetics
|
